Workbench: I'm declaring victory
wilbur
My workbench is pretty much done. There are still a few things to do. I still need to make a sliding deadman, but I've found that I have other ways to deal with edge planing longer boards for now. I also need to tune up the handle for the vise, put some boards across the bottom stretchers for extra storage, and make a real pin for the leg vise instead of the 3/8" oak dowel that I'm using. I also want to hang an additional fluorescent light fixture above the bench.
But the bench is in position, and I've got the key parts of my wall tool storage up and running. As you can see, I decided to go with unfinished pine boards. I might decide to paint the pine boards later on, but that will be easy for me to do if I go that route, since all the tool storage is just screwed onto the pine boards.
So I'm finally declaring victory on this project. And it only took 18 months. 
The exposed 2x4's to the left of the bench is where my sharpening table is. It's not there now so I can mount pine boards onto the 2x4's like I did for my workbench.




