Wood screw bar clamps
Bill Houghton, Sebastopol, CA
I've been churning stuff in my storage shed to make room for the printing press (small, hand-powered) and its accessories that our older son inherited from my father, but that he - the son - has yet to find room for in his place*. In the process, I ran across a couple of bar clamps that my revered uncle Charlie had picked up in his travels, and thought I'd post some pictures here.

I suspect both clamps were originally the same length; the shorter one shows evidence of having been repaired - through bolts instead of screws on the headstock, two nuts instead of a wingnut on the tailstock. Maybe it broke off short at the same time it failed otherwise.

Both screws have these points at the end. I thought at first that there must have been permanent pads, but in thinking it over, I think the points must be there to grip the work or a temporary pad.

This picture shows the tailstock adjustment method: a groove to keep the tailstock from twisting, and holes through which the tailstock is bolted to the beam. Although it doesn't show well in the first picture, the longer clamp has got a really nice wingnut for the bolt.
While it's tempting to see how well these work, I'd worry about breaking them; I think that, like our 14-year-old Siamese cat, these are now retired from active duty and can spend their time sleeping. If/when I get a real shop, they'll wind up on the wall, where they can advise the younger clamps in how to hold on.
*Is it a rule that parents' houses are the storage units for their children - or are we unique?
- that's assuming of course that you don't already have enough projects to fill your days! Either way, those are some pretty neat old clamps. I wonder how old? The bolt looks machine made...


