Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Use for 0.042 1095 Spring steel?

Posts

Use for 0.042 1095 Spring steel?

#1

Use for 0.042 1095 Spring steel?

Dominic in Buck's County PA

A little "marketing research" here.

The company I work for uses 1095 spring steel to manufacture a line of safety covers for shafts, screws, etc. Last year I came up with a good use for the scrap generated. We cut up some of the 0.025" and 0.020" thk scrap SS and 1095 steel into 2.38" x 6" rectangles and sold them as cabinet scrapers. Did pretty well too! Enough so that we're getting a hydraulic shear (I'm actually looking for a stake body truck to rent right now so we can pick it up)

Anyway, I just got word that my man out in the shop dumped several small ROLLS of 0.042" thk 1095 Blue Polished steel into the recycle bin. This stuff is so thick that can't be sheared (easily). It has to be cut up using electric metal shears.

I need to know if there is a use for this stuff before I go and try to retrieve several 30 lbs rolls from the bottom of the dumpster. It's a bit thick for a saw plate, right?

I know it can be used for scratch stock, and maybe scraper plane blades. But I'm a bit concerned as to the amount of labor it would take to accurately cut it to size.

If anything, we'd offer 2' or 3' lengths of it.

Any thoughts?

BTW, better hurry! It's raining and even though it's under an overhang, Blue Polished steel doesn't like being out in the rain. :D

See ya around,

Dominic

Re: Use for 0.042 1095 Spring steel?

#2

Re: Use for 0.042 1095 Spring steel?

Dean J in MN

How wide is it?

.042 isn't out of line for a big (3ppi) rip saw plate...

Re: Use for 0.042 1095 Spring steel?

#3

Re: Use for 0.042 1095 Spring steel?

Dominic in Buck's County PA

6" Wide

Re: Use for 0.042 1095 Spring steel?

#4

Re: Use for 0.042 1095 Spring steel?

Dean J in MN

Seaton's half-rip was 6-5/8" at the heel, so you could squeeze out a rip saw from 6" plate if you had to (considering the cost of the plate in your case is nil.) :)

Re: Use for 0.042 1095 Spring steel?

#5

Seconding Dean

Wiley Horne--So. Calif.

Hi Dominic,

I was very fortunate to have obtained a big rip saw from Mike Wenzloff. He handscraped a double taper into it (before he had machinery to do this). The plate measured right above the tooth line is 42 thousandths. 5-1/2 to 6 ppi. 28" length. You could find out what length goes well with 6" max. depth of plate.

You mentioned scraper plane blades--also card scrapers.

Knives for cutting gauges.

Marking knife blades (esp. for small pin entries).

Good score!!

Wiley

Re: Use for 0.042 1095 Spring steel?

#6

scott grandstaff

Re: Seconding Dean

scott grandstaff

Are you kidding? In the dumpster??

Suit up......and dive, Friend, dive in and wallow!!!!!

Get them nuggets!! Get it all!

Mike (any maybe others) could taper grind it to whatever he wants, for one thing. 6" is plenty wide enough for a standard CC to any kind of panel saw down to heavy duty tool box saws, if its reground tapered.

I like my scraper blades thin, not to open that can of worms again.

But shavehooks need to be beefier. Veneer saws are about this thickness,

At this thickness flexible carving knives and drawknives might go.

Its free and you are asking advise??

yours Scott

Re: Use for 0.042 1095 Spring steel?

#7

Re: Damascus

ThomD

Sounds about the thickness of the cutters in those profiling scratch beaders.

For small bits you could upset it to a thicker gage.

What it would be really good for is damascus steel making. You layer that in with something different, and when it all comes out you have a damascus blade. I'd love to have some for that.

Re: Use for 0.042 1095 Spring steel?

#8

Re: Seconding Dean

Dominic in Buck's County PA

Yeah, I know it's "free". But I still have to consider if people will pay for it, how much, and how I'm going to cut this stuff! It's only good to me if I can find an easy, safe way to cut it up to size in house. Personally I'm in favor of just cutting it into 30" pieces and selling it that way

I'm basically trying to make money for the company in a way they've never considered. I'm also trying to earn enough "credit" so my department can get another seat of Inventor :D

And yeah, I already salvaged a 20 foot roll and it's sitting somewhere nice and dry. The other stuff is out of the rain in a dumpster. So I covered it with a tarp just in case I can find somewhere to store it in the shop.

This stuff is perfect for saw making. I have (2) pieces of 6" x 16" x 0.032" 1095 blue polished steel sitting right next to me that have been to a friend who has a Foley Retoother. They have 10TPI cut into them and are ready to be made into those half back saws I mentioned in that miter saw thread.

If any of you guys here are keen about those big pieces (6" x 30" x 0.042" thk) for making a rip saw, drop me a line. If I can get a good amount of interested parties, I'll put together a price list, get back to the everyone, and see if I can get this into production at work.

Re: Use for 0.042 1095 Spring steel?

#9

Re: Seconding Dean

GregForster

What would make it interesting would be :

1) sheared to final shape,

2) toothed

Re: Use for 0.042 1095 Spring steel?

#10

Re: Seconding Dean

Dominic in Buck's County PA

That's isn't going to happen any time soon. Sending it out to get teeth cut in and having it cut to final size would add a level of cost that may make it hard to sell.

You're better off going to Mike Wenzloff for fully formed kits like that. He includes EVERYTHING you'll need and in the end, you have a Wenzloff saw. One of the best on the market.