Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Worth sharpening?

Posts

Worth sharpening?

#1

Worth sharpening?

Edward in Vancouver

Picked up two items at the flea market today

One is a Spear & Jackson Dovetail saw. 12", with 2" of plate depth. "about" 12 t/inch, badly filed and progressively worse as it gets near the heel. About a 2" long kink near the toe.... On the plus side there's so much black gunk on the plate that there's very little pitting.

Worth getting to a pro and getting fixed? Anyone in the Vancouver area that can do this?

Second item was a #10 1/2--under a heavy coat of Tremclad's finest blue, but the guy didn't get the inside good enough to cover up the brazing and grind marks of the repair on the left wall. Knob and tote are great--under multiple coats of urethane. Maybe 3/4" left on the blade, which is heavily crowned. Got a suspicion that this was used a scrub. No markings except "10 1/2" and "B", corrugated sole. Stanley stamped on the adjustment lever and the yoke is cast, plain lever cap, in good shape, but painted silver.

Got most of the paint off and have ground and filed the brazing to an acceptable level. Don't know about the blade, anyone make a replacement for a a 10 1/2?

Re: Worth sharpening?

#2

Dale Lenz

Re: Worth sharpening? *LINK*

Dale Lenz

Look on ebay also


Replacement iron

Re: Worth sharpening?

#3

Re: Worth sharpening?

Marv

Edward,

Your saw sounds like the kind I sometimes buy on eBay. Most of them can be fixed. The only thing that makes them unrepairable is if the blade is cracked in the center area of the tooth edge. If a blade is cracked fairly close to the toe end, the saw can be shortened, that is if the blade isn't already a short blade, like 8".

A badly filed blade is dealt with by doing multiple jointings and filing until all the teeth are even. I'm presently working on a tenon saw with a missing tooth right in the center area of the tooth line. I did my first jointing on my belt sander. Sanded off half the tooth height. I'll continue until the tooth grows back.

Some people will just retooth it, but that removes excess metal, more than jointing and filing.

Most of the time a kink can be fixed. The back will have to be removed in most cases.

Marv

Re: Worth sharpening?

#4

Re: Worth sharpening? *LINK*

Bill Houghton, Sebastopol, CA

St. James Bay Tool Company lists blades for the 10-1/2 - strangely, they say "call" for price, although they list a price for the No. 10's blade, which I think is the same size - ? Click on "Tools," then "Stanley Reproduction Replacement Parts" (something excessively redundant about that phrasing). They do respond to e-mails, although not always quickly, and I've never purchased from them, so know nothing about the quality of their steel.

Congrats on the finds; I hope you were successful in haggling the price down.


http://www.stjamesbaytoolco.com/

Re: Worth sharpening?

#5

Re: Worth sharpening?

Edward in Vancouver

Thanks for the links, I'll be investigating them.

According to the Stanley dating flowcharts, the plane is post WW2. Got all of the blue paint off, still some jappaning left. The "windows" don't match up, the damage was on the left cheek, and the "window" was larger and off-set from the right.

Paid $12 for it, guy had a Craptsman #78, a #4 handyman, and something else all dolled up with the blue and silver spray paint.

Still, it's cast as "10 1/2" not 10 1/2 C, and has a "B" cast above the 10 1/2. Corrugations look regular and even. Tote and knob are in real good condition, but I had to strip off everything to get at those multiple layers of varathane

The saw I paid $5 for. But this has 3 split nuts. Handle has a minor chip, and scratched up, like it was banged around in a toolbox for years, but no cracks and otherwise decent. Even if the sharpening doesn't work out, I'd like to keep the handle as a pattern and use those split nuts again.

Re: Worth sharpening?

#6

Re: Worth sharpening? *LINK*

Bruce, a MN Galoot

Ron Hock makes replacement blades for the 10, which should be the same as 10-1/2


hock tools

Re: Worth sharpening?

#7

Re: Worth sharpening?

Cecil Nickerson in Halfmoon Bay

Edward, Lie-Nielsen offers a replacement iron for the 10 1/2. I had one in my 10 1/2.

Cecil