Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Stanley 220 plane

Posts

Stanley 220 plane

#1

Stanley 220 plane

Bill Houghton, Sebastopol, CA

I remember a recent* discussion of the 220, in which someone was praising its virtues. One of the little piles of rust that followed me home from yesterday's garage sale cruising turns out to be a 220 (with a broken adjuster, missing front knob, and very odd lever cap, like a bench plane cap, also broken). Before I invest any time and energy in it, does anyone recall the title of that thread? I'm having trouble finding it through the search tool.

*Thanks to my 62-year-old brain, "recent" means "Yeah, it was some time after our older son was born." Since he's 37 now, that's a broad time band; but I think the discussion in question was in the last couple of months.

Re: Stanley 220 plane

#2

Re: Stanley 220 plane

Neal in San Jose

My 63 year old brain isn't much help recalling the thread you are speaking of, but I do know one trick that turned my 220 into a much more usable tool. Mine is one of the maroon ones, so I guess that dates it to the '60s or '70s, and it came with a throat that you could have thrown a dead cat thru.

If you put a back bevel on it, you move the blade forward to compensate, and the throat closes up. Don't go more than about 12 degrees on this 20 degree plane, because you do need a relief angle. The width of the back bevel determines how far forward the blade will move, and will be dictated by your individual plane. My back bevel is about 3/32, and got the throat down to about 10 thou without a lot of effort and no expense. Just remember that the blade angle will be the total of the back bevel plus the "normal" bevel. This trick will work with any bevel up (block) plane, so you can close up the throat on any "non-adjustable" plane.

It is usually on the shelf (I prefer the feel of my LN), but it is REALLY handy when the neighbor comes over and wants to borrow a plane. I'm able to loan him a tool that I know will work well, and I won't shed any tears if he drops it off of a ladder onto a concrete floor or something. It's also the one I take to job sites if I think there may be other contractors around.

Re: Stanley 220 plane

#3

Hi Bill,

Scott Burr in Ben Lomond CA

Sorry, I'm no help in remembering the post that you are referring to :\

I have one (well 2 actually) that I manly use for leveling epoxy patches in knot holes etc. It works well here and I don't have to muck up my #18 or 62.

That said, I've gutted the 2nd one to make a little infill smoother out of.

I have all the parts you need to fix yours except the front knob.

Let me know if you want them.

Re: Stanley 220 plane

#4

E-mail sent

Bill Houghton, Sebastopol, CA

Re: Stanley 220 plane

#6

And sent you one back, saying "yes"

Bill Houghton, Sebastopol, CA