Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Interesting Dado Saw

Posts

Interesting Dado Saw

#1

Stephen Shepherd

Interesting Dado Saw

Stephen Shepherd

A friend of mine bought this recently for under five dollars. Looks hand made but done nicely, the square nuts are inlet into the side. The blade is unusual, note the spacing of the gullets.



Stephen

Re: Interesting Dado Saw

#2

Stair saw

David Miller from Iowa

Looks like a home made stair saw made from the blade of a 2 man bucking saw.

Re: Interesting Dado Saw

#3

Yes, nice Saw

Bill Houghton, Sebastopol, CA

I agree with David Miller about the probable ancestry of the saw blade - but it's kind of a clever idea, plenty of room for sawdust in the kerf, which otherwise has no place to go.

Re: Interesting Dado Saw

#5

Stephen Shepherd

Re: Interesting Dado Saw - Blade

Stephen Shepherd

Here is what the blade looks like removed from the saw. The gullets were all ground into the blade, explaining the unusual spacing.


Stephen

Re: Interesting Dado Saw

#6

Re: More like the... *LINK*

Marv

The teeth are filed like "peg" teeth, same rake angle front and back. It won't cut aggressively. It looks like about 6PPI which is too large for a smooth cutting crosscut, but with the peg teeth it might cut (scrape) ok. With teeth that big, there really isn't any need for the giant gullets. A blade that short is not going to produce much sawdust. These saws are meant for short and shallow cuts. The blade is adjustable up and down for setting the depth of cut.

Leif Hanson made one of this type saw for himself and wheat carved it, but for some reason, chose to not paint it John Deere green. :D

Marv


Leif Hanson's Stair Saw   "scroll down"