Notice - the CRAFTS Auction is this Saturday 4/24 *LINK*
John Aniano in Central NJ
http://www.craftsofnj.org/
Knowledge You Can Build On — Est. 1998
Notice - the CRAFTS Auction is this Saturday 4/24 *LINK*
John Aniano in Central NJ
http://www.craftsofnj.org/
Re: Notice - the CRAFTS Auction is this Saturday 4
Wiley Horne--So. Calif.
Hi John,
Have fun! By the way, if you happen to run across Sir William, Stephen Thomas, Ray Wendrycki (sp), and other old-tymers too numerous to mention all of them--please let them know they're not forgotten here around the cracker barrel.
Wiley
Report from the CRAFTS Auction...
John Aniano in Central NJ
Wiley,
Not one of those you asked about attended the auction, I'm sure they had more pressing things on their Saturday agendas.
I did see and talk with some new members of the CJWA + some long-time members, including Mark Gartner, Wilbur Pan, Paul Dzioba, Dave Healy, Jim Peoples, Steve Altman and Bob Zwick. Some were bidding, some only attended the pre-auction tailgating.
In general, we thought the prices were on the lower side, but some unusual items (the stuff I was bidding on, of course...) went for higher prices than one might expect. Dave got several boxes of some early near-mint English moulding planes for $5 and $10 per box! No one was looking! Bob Z. got a Stanley 55 with most of the accessories and cutters for ~$80! Again, the crowd was sleeping or eating lunch!
The day's high-bid item was a center-wheel plow plane - I think went for over $3000. It was crispy and looked like it was made maybe 20 years ago, not 120...
I did find a nice small English "Fletcher" backsaw with open handle and split nuts. Fletcher closed up shop in the mid-1840's so it has to be from before mid-century. Also a nice 2"x8"x1" black hard Arkansas stone for $10...
Take care,
John
Re: Report from the CRAFTS Auction...
Wiley Horne--So. Calif.
Hi John,
People move on, but it's good for them to know they're not forgotten.
A fine report on the tools! Hard to imagine how those English moulding planes slipped in under the radar, but congratulations to the new owner.
Can we see a photo of the Fletcher saw, once you go over it? How does the steel seem to you, from sharpening?
On the black Arkansas stone, Larry Williams is a big fan of dressing oil stones with a diamond stone (or equal) to refresh the cutting face--do you do that also? Similar technique works well on natural water stones also.
Maybe we can get Wilbur to fess up to his exploits, though I have to think Japanese tools would have been pretty rare!
Thanks again for the good report,
Wiley
Re: Report from the CRAFTS Auction... *LINK*
wilbur
I had a good time looking around, but didn't get anything. No Japanese tools, although there was a half set of hollows and rounds, made by Mosely, London, non-skewed, that looked like they were pitched at 50�. I was told that for some reason the #6 pair were two hollows, so there was a pair of #7 hollows and rounds thrown in.
In a moment of insanity, I thought about using one of the #6 hollows to turn the other #6 hollows into a round. Then I ran away.
I wasn't able to stay long enough for the auction, but I was able to look over the auction lots quickly. I found one lot that was pretty entertaining. There's a picture of it on my blog.
Lot 443 at the CRAFTS auction.
Another auction report from oldtool hell
Paul Dzioba
Hi Wiley,
It was a good day at the auction. I arrived early to check out the tailgate sellers. There didn�t seem to be as many as in years past. I bought two Hard Arkansas stones, one a translucent white and the other a black. The black was a Norton in its wooden box with the green label. I paid $20 for the two. My other purchases were 2 tang type firmer chisels and half a dozen center bits. The center bits were unused and $2 each. One of the chisels was a Swan, 1� wide and unused. The other was a Sheffield maker, I don�t recollect the name, and was 1-1/2� wide and little used. I paid $40 for the pair since they were so nice and I don�t see too many quality tang type chisels often. There were plenty of socket chisels to be had. One fellow had a truck load of vintage hand and tenon saws, it seemed like he couldn�t give them away.
I was surprised how cheaply the lots went in the auction. The crowd seemed to be mostly collectors looking for fine examples. Lots of really nice user grade tools went cheaply. Number 8 Stanley planes seemed to average about $35. I saw box lots of saws going for $5 and $10. There were quite a few European planes, Dutch and German. These went cheaply too, maybe $10 a box of 5-10. My friend Dave Healy was buying to outfit the joyners and cabinetmakers shop at the Moland House (moland.org) and did very well bidding.
I could have bought a lot more stuff, there were so many bargains but I have pretty much what I need. It was a great day weather wise and was fun hanging with my friends, it doesn�t get too much better than that!
Paul Dzioba
A heads up for aspiring metal workers
Bob Hackett
Can`t remember if it was you or not ,Paul but more than one of the visitors up here talked about maybe getting an anvil in the future.
Just to let the rest of the WWing community know about what a lot of the metal heads are seeing.The days of buying an anvil for $1 a pound seem to be over and $2-3 per pound+ and rising seems to be the norm now.
If you see deals on metalworking tools out there,especially anvils you may want to keep this in mind.
MB
Anvils rarely seen!
Paul Dzioba
They seem to be in demand around here.
Paul Dzioba
Re: Report from the CRAFTS Auction...
John Aniano in Central NJ
Wilbur,
Great photo! I agree about the dual nature of these two tools...
BTW, when I tried to open the side bars on your blog website, it caused Mozilla to crash repeatedly. The links are:
* fun
* saw
* workbench
* chisel
* plane
* wood
* sharpening
I guess that the "fun" part is watching Mozilla crash, right?
John
Snatch 'em up! It's almost too late. *LINK*
David Barnett
"The days of buying an anvil for $1 a pound seem to be over and $2-3 per pound+ and rising seems to be the norm now."
I'll say. I've seen anvils in poor condition selling for $3/lb and higher and questionable to better anvils selling for up to $4.50/lb. Of course, this is Florida, but that's over half the price of a quality new and unblemished Nimba double-bick anvil.
The smaller anvils sought by jewelers, silversmiths and knifemakers are getting scarcer and can really bring a premium. There's even fiercer competition for hammers and stakes in discontinued patterns. I'd hate to think what I'd be up against if I was just starting out. And if you go miniature and new, it adds up fast:
http://www.fretzdesign.com/tools/index.html
If I recall correctly, I paid $1.35/lb for my 200lb Trenton, delivered. My smaller anvils were even cheaper. That's the difference ten years and leaving Tool Heaven make.
Nimba Anvils