Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

Two small boxes for my daughter

Posts

Two small boxes for my daughter

#1

Two small boxes for my daughter

Dominic in Buck's County PA

I posted this on another WWing forum but since I was wearing WC's colors for the photo, I decided it belongs here as well!

_____________________________________________________________

Back about 3 years ago I decided I needed to make a finger joint jig. So I went through the entire project and cut up enough to make a run of boxes in various sizes. Then I decided hand tools were more my thing and promptly shelved the jig!

Anyway, flash forward to a week ago when my daughter and I were looking for something to do together. I found these parts and asked her if she wanted to put them together. So we broke out the scrapers and cleaned up the sides and the panels. After that we glued them together and allowed the glue to dry.

I cleaned up the joints using a block plane and then cut the lids off at the table saw. After that it was all hand tools (eh,...what was left?). Well mortising for the hinges and mounting them for one. Totally done with hand tools. And if you want to stretch it, I signed them by hand as well. But I used a wood burning pen.

Photobucket

Photobucket

Seriously, these were finished off using a block plane and a No3 smooth plane. This mahogany was pretty prone to tear out. So scraping with a nice sharp scraper was very helpful. And I really did use hand tools only to mortise in for the hinges (sm. router plane, chisels, and a egg beater drill). I was pretty happy that I got a chance to use my small router plane. They aren't perfect. The joinery is a bit loose and I can see some gaps here and there. But it was a lot of fun to make them. And I'll smile each time I see her use them.

Photobucket

I gave each box a coat of danish oil and then a coat of wax. My daughter wants to store her "rocks" (crystals we got from a vendor at a local flea market) in one. And her special cards in the other (birthday and Valentines from Mom and Dad).

See ya around,

Dominic

Re: Two small boxes for my daughter

#2

Nice boxes, sweet dad and daughter photo

Bill Houghton, Sebastopol, CA

I'm glad you explained her plans, because I was trying to figure out how she was going to fit the stuffed doggie in the boxes.

Those are nice boxes, and I bet she'll continue to use them as she grows along, for other keepsakes as her interests change.

And, hey! Where's HER Wood Central hat?

Re: Two small boxes for my daughter

#3

Nice job on both

Bruce, a MN Galoot

daughter and boxes! It looks as if she's got dad pretty well figured out. :D

I used to make finger-jointed boxes because I thought they would be easy. For me it was anything but easy to get the jig set up right, so I took up dovetails.

They sure look good when they turn out right, like yours did.

Re: Two small boxes for my daughter

#4

Absolutely Stunning!

Scott Burr in Ben Lomond CA

You daughter that is :D Dom, she's growing up! FAST!

I like your boxes too!

The best to you all ;)

Re: Two small boxes for my daughter

#5

Re: Absolutely Stunning!

roninkokomo

She will have them all her life.

Good job Dom

Re: Two small boxes for my daughter

#6

Re: Absolutely Stunning!

roninkokomo

She will have them all her life.

Good job Dom

Re: Two small boxes for my daughter

#7

Re: Two small boxes for my daughter

Mike Rubes, Apex, NC

Hi Dom,

Those are wonderful! I am sure that she will have them for years and years to come. Every little bit of "hand" work counts. I am in the final stages of a new stereo cabinet and a lot of the final fitting of pieces was done with chisels and a block plane.

Fun stuff! I hope all is well in PA!

Mike

Swimming all over in Apex, NC!!