Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Workbench in place, almost done, but working!

Posts

Workbench in place, almost done, but working!

#1

Workbench in place, almost done, but working!

wilbur

I've got my almost complete workbench in its new spot in my shop.


The floor is a bit uneven in that part of my basement, so that the workbench was rocking a little, but putting a wedge under one of the legs quickly took care of that issue, and now this thing is rock solid.

I can't believe how much more room I have now that the workbench is out of that middle area of my workshop. The hand tools stored on the far wall will be moved to the wall above the new workbench location, and my lathe, which used to sit where the workbench is now, is going to be situated along the far wall. I also want to add some lighting directly over the workbench area.

I'm currently working on the leg vise chop. It's so nice to have a real work surface to do this.


After I make that, the sliding deadman, and set some boards across the stretchers for some storage space, this bench will be done! There shouldn't be any real issues with building those parts (famous last words) so unless something interesting happens ;) , the next and last thing I'll post about my workbench will be the finished product.

Re: Workbench in place, almost done, but working!

#2

Re: Workbench in place, almost done, but working!

Bill Houghton, Sebastopol, CA

Nice progress shot, and nice progress. You'll have quite the working surface soon.

By the way, although you may not have an issue with your hefty bench, I've found that it's helpful to slather a little glue on the upper side of any wedge I drive in to level something, to discourage its creeping out.

Re: Workbench in place, almost done, but working!

#3

Re: Workbench in place, almost done, but working!

Hank Knight

Great job, Wilbur! Now the fun begins. You're going to love using your bench. :)

Hank

Re: Workbench in place, almost done, but working!

#4

Re: Workbench in place, almost done, but working!

Todd O. Cronkhite

............and here comes Wilber, rounding third and headed into the Homestreach!!! Ladies ,Gentlemen and Children of all ages, it's been a long hard race, but it looks like he's gonna make the Finish Line afterall, and in Fine Fashion I might add!!

Re: Workbench in place, almost done, but working!

#5

Ask the Rabbi

James Watriss

A man goes in to see his Rabbi.

"Rabbi, I can't stand it, my house is so small, my family and I have no room to move, we're driving each other crazy."

Says the Rabbi: "Do you have a cow? Move him into the house."

The man is puzzled, but does as he's told. But within a week, he's at his wits' end, and he goes back to the Rabbi, who gives the following advice:

"Do you have sheep? Move the sheep into the house, too."

A week later, the man returned, and was told to move his chickens into the house.

After this, the man was hesitant to go back to the Rabbi. Sheep and a cow and chickens everywhere, he was very concerned about what he was going to have to bring inside next. But after 2 weeks of nightly fighting in the house, he finally went back.

"Rabbi, I've had it. My wife, my children, are all going crazy. We're completely out of room, we can't take it anymore."

"Good. Now take all of the animals and move them back outside. I think you'll find now that you have a lot more room than you originally thought."

------------------------------------

Congrats on clearing out all that floor space in the middle of your shop. :)

Re: Workbench in place, almost done, but working!

#6

Nice work, Wilbur!

Stuart Hough

Re: Workbench in place, almost done, but working!

#7

Sweet!

Bruce, a MN Galoot

The bench looks like it was made to go in that spot. Nice work.

Re: Workbench in place, almost done, but working!

#8

Re: Workbench in place, almost done, but working!

Pam Niedermayer - Austin, TX

Nice. Your shop photo sure looks bigger than the drawing you posted some months ago.

Pam

Re: Workbench in place, almost done, but working!

#9

Re: Workbench in place, almost done, but working!

Derek Cohen (in Perth, Australia)

Hi Wilbur

Wow, it looks good! Better than good.

I am curious why you have not placed the bench away from the wall. In my own shop, a converted double garage, there is no room to do so as I still have to park one car. However in yours it looks like you could centralise the bench (which offers so much more opportunities) and, if needs be, could maintain the area near the wall as free space. That would be my idea of heaven. What is your plan?

Regards from Perth

Derek

Re: Workbench in place, almost done, but working!

#10

Re: Ask the Rabbi

wilbur

That's a good one! Next time I feel like my shop is too small, I'm going to put a pile of lumber in the middle of the floor for a while. ;)

Re: Workbench in place, almost done, but working!

#11

Re: Sweet!

wilbur

That's one of the great things about making a workbench. The first thing I had done was measure the length of that spot in my shop to get an idea of how big I could make the workbench.

Re: Workbench in place, almost done, but working!

#12

Re: Workbench in place, almost done, but working!

wilbur

Hi Derek,

All things considered, I would love to have the bench in the middle of the room. What the picture doesn't show is what is against the wall opposite the bench. In that spot is a dust collector that I move about for the times that I'm using my bandsaw, lathe, or jointer/planer combo machine. The jointer/planer combo also sits in that area, and I move it out into the middle of the room to use it. My shop is about 11' across, so if I had the bench away from the wall I'd be pretty close to those machines while using the bench, and further away from my hand tools that I plan on moving to the wall area above where the bench sits now. If the bench was in the middle of the room, then I'd have to keep pushing it back against the wall whenever I would need to move the dust collector or the jointer/planer.

I do have plans to relocate the dust collector towards the other end of the room where my lathe will be relocated, and to see if I have the room to park the jointer/planer over there as well. I'd be moving the drill presses at that end of the room to the wall across from my bench as well. That might free up my bench to be in the middle of the room.

Re: Workbench in place, almost done, but working!

#13

Re: Workbench in place, almost done, but working!

wilbur

Three words: wide angle lens. ;)

Re: Workbench in place, almost done, but working!

#14

Looks great!

Marv

Looks great, Wilbur.

Living in the bankrupt state of California, I can see another good use for a bench as well built as that. Good earthquake protection. The whole house could fall it and not phase it.

Marv

Re: Workbench in place, almost done, but working!

#15

Re: Workbench in place, almost done, but working!

Dan Donaldson

You could also consider making the bench mobile.

Re: Workbench in place, almost done, but working!

#16

Re: Make It Mobile

Hank Knight

You could make it mobile, but then you'd have to find room to park the Mack Truck it would take to move that beast around. :D

Re: Workbench in place, almost done, but working!

#17

Re: Workbench in place, almost done, but working!

Wiley Horne--So. Calif.

Just grand, Wilbur! Say, what's that stalk sticking in the left front leg?

OK, OK, I can wait til you're ready to show....

Wiley

Re: Workbench in place, almost done, but working!

#18

Re: Workbench in place, almost done, but working!

wilbur

Hi Wiley,

That's just the wooden screw part of the leg vise. It's there to prove to myself that I drilled the proper size hole for the leg vise. ;)

Re: Workbench in place, almost done, but working!

#19

Suspicion confirmed

Wiley Horne--So. Calif.

Wilbur,

Congratulations! Was hoping you would be using a wooden screw for the leg vise. The vise should be magnificent.

Wiley

Re: Workbench in place, almost done, but working!

#20

also known as "real estate agent lens"

Bill Houghton, Sebastopol, CA

at least that's my term for pictures taken that way.

Still, it looks like a nice little shop, Wilbur. Lots of good work has happened in those snow country basements.

Re: Workbench in place, almost done, but working!

#21

If I recall correctly,

Bill Houghton, Sebastopol, CA

one of the inspirations for this bench was the fact that Wilbur's last bench was so mobile that he had to brace it against the wall to do any planing.

Re: Workbench in place, almost done, but working!

#22

I admit to loving wide angle shots. 

Pam Niedermayer - Austin, TX