Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Yard sale images- help? *LINK*

Posts

Yard sale images- help? *LINK*

#1

Yard sale images- help? *LINK*

Dean Lapinel

Went to a nice inexpensive estate sale.

The telescope is missing the smaller lens. Any web page for this type of stuff?

The bigger vise was a nice surprise. I didn't know it was adjustable to varying angle og 90 degrees. Anyone know much about this?

The RR anvil will come in handy. The typewriter works...it folds on itself and has the original case. I need to clean it though as it's a little sticky. Anyone know of a good web site for this? It is an LC smith Corona.

I needed the granite for leatherwork ($1)

I have no clue what model number the singer sewing machine is but I do know it's from 1948 and works perfectly. I need to get an instruction book somehow.

Al Jolson complete and intact record set? Major cool!

The Sewing machine was pricey at $35 but everything alse was 1-3 dollars.

I would appreciate any input about some of this stuff. I would especially like to fix the telescope.

Not in the photos is a Craftsman combination sharpening stone in its box Liste No 6440, 1X2X6" -perfect shape but I don't know what type of stone it is.

Dean


images of junk

Re: Yard sale images- help? *LINK*

#2

Re: Yard sale images- help?

Bill Houghton, Sebastopol, CA

Well, you scored - it's always nice to get shiny auger bits - so often, you get a lot of rust along with the bit. And Jennings, too.

The angle vise is a fairly common design - a metalworker's tool originally. This is one of two common patterns, the other using a curved base with matching curved vise body.

For your questions on the telescope and typewriter (both VERY nice finds, by the way), you might google "telescope forum" and "typewriter forum" and go visiting. These two search terms got me lots of hits; the wonders of the Intertubes. Take flowers, and say hi from us.

Congrats again on a good haul.

Re: Yard sale images- help? *LINK*

#3

Re: Yard sale images- help?

Wiley Horne--So. Calif.

It's all in such nice shape! It's been taken care of. Even the molding plane has a perfect wedge in it--no dings on the finial. Are some of those augers still in the wax paper? What's the brace--kinda favors a Stanley 813.

Wiley

Re: Yard sale images- help? *LINK*

#4

Re: Yard sale images- help?

Dean Lapinel

Thanks Bill,

You are always so helpful to everyone. I hope you are paid back for your good deeds.

Best-

Dean

Re: Yard sale images- help? *LINK*

#5

Re: Yard sale images- help?

David Churnega

Did the Craftsman moulding set box have anything in it?

Re: Yard sale images- help? *LINK*

#6

scott grandstaff

Re: Yard sale images- help?

scott grandstaff

Every imaginable part is still available for the Singer. The decals look pretty good from here (most important part), even though its in a modern case.

With a walking foot attachment you can sew upholstery leather and a bit thicker, or 6 layers of denim easy, with these strong old machines.

Typewriters are nearly uncollectible. They have to be mint and perfectly functional and either rare and early, or brilliantly decorative, to even be noticible.

I would expect an eyepiece lens from some early field glasses or plain opera glasses (both dirt cheap when you find them) would work for your telescope, darling little thing that it is.

Palmgren is a top name in machinists vises. This one is not rare, but its a good one.

Can't really see the ax, drawknife or the rest of the saws. The saw on top looks to be a nice one that was kind of messed over on an automatic sharpening machine operated by an amateur.

What's under the chisel? More chisels or a set of plow plane blades??

yours Scott

Re: Yard sale images- help? *LINK*

#7

Re: Yard sale images- help?

Dean Lapinel

Yes on the wax paper. No markings on the brace though.

Re: Yard sale images- help? *LINK*

#8

Re: Yard sale images- help?

Dean Lapinel

Just a mint, never used intact cutter head with six profiles in sets of three, some kind of an adapter and a hex wrench. I wonder why it was never used and I wonder how the price for the quality I see could have been $14.99 from Sears (old sticker).

Re: Yard sale images- help? *LINK*

#9

Re: Yard sale images- help?

Dean Lapinel

You have a better eye that I do. I looked just for your sake and took a snapshot of these Sandusky plow plane blades. One is reveresed in the photo just to show the stamping. They will clean up well and I can fix the bashed heads with some judicious forging. I have to look and see if there are more but someone out there can use these. I, unfortunately , don't have a sandusky plow plane. Maybe I should try and get one to fit the blades? That's a little backwards as an approach isn't it?


Re: Yard sale images- help? *LINK*

#10

Stephen Shepherd

Re: Yard sale images- help?

Stephen Shepherd

Dean,

Funny you should mention that. I happen to have a rosewood Sandusky plow plane with no blades. I have another complete plow plane.

Stephen

Re: Yard sale images- help? *LINK*

#11

Re: Yard sale images- help?

steve mackay

No help here but wondering . . . the top hand saw . . . Disston I think. Is the back end of the blade (under the handle) bent or is it shaped like that intentionaly (sloping down away from the handle) ? Or just a trick of the camera ?

Re: Yard sale images- help? *LINK*

#12

Re: Yard sale images- help?

Dean Lapinel

That one is an Atkins and it takes a strong curve as it approaches the handle. I don't know anything about handsaws but my guess is that the saw broke and someone set new teeth in but didn't worry about that curve. The teeth are a little crude looking at one point of the curve which makes it look machine cut. Pretty sharp though.

Re: Yard sale images- help? *LINK*

#13

Re: Yard sale images- help?

Dan Donaldson

I have one of those and used it once or twice when I first got it. I think part of the reason it might not have been used is that in use, it is about the scariest tool I have ever used. Sounds like a vacuum cleaner or jet engine and seems like a kickback looking for a place to happen. After that first couple of times, I put it in the drawer and have never been tempted to take it out since.

Re: Yard sale images- help? *LINK*

#14

scott grandstaff

Re: Yard sale images- help?

scott grandstaff

I mentioned the funny looking saw blade, because I had nearly the exact same thing happen to me one time, years ago.

An inexperienced saw mechanic let a Foley saw machine slip, and it ate away the blade badly when nobody was watching.

She apologized and offered me the "service" for free. :(

I am sure she didn't have a 1900 vintage Disston backsaw to replace it with

anyway.

The Atkins saw appears, it was either cutting new teeth or even a simple filing, only instead of just taking off a small amount, the saw slipped in the clamp and it took off 3/4" or more of blade at the butt end of it,

all except the last inch or so,

when it was noticed and the saw machine stopped.

It won't be impossible to straighten it out by a competent saw mechanic. yours Scott

Re: Yard sale images- help? *LINK*

#15

WHEW ! . . .

steve mackay

At least its not my eyes . . . yet. Was kinda hopeing it was a mystery like "Da' Nib". Very rare and valuable. The curve was to magically cut that last little toothpick at the end of a cut. That'd be my story.

Re: Yard sale images- help? *LINK*

#16

Re: Yard sale images- help?

Andy Lincoln,in Dearborn MI

Dean,

The reason your molding cutter wasn't used much is it is missing the adapter to chuck it into an eggbeater drill to get it spinning at a speed that would cut the moldings well.Most people became quickly frustrated when having both hands in use spinning and steadying the drill while walking a straight line down the bench making the molding. :D

Andy

Re: Yard sale images- help? *LINK*

#17

Re: Yard sale images- help?

Dean Lapinel

Hey...I'm not that stupid! I was going to rig it up to my dryer's spin cycle. Harumph :)

Re: Yard sale images- help? *LINK*

#18

Re: WHEW ! . . .

Dean Lapinel

I think it is rare and valuable. I am pretty certain it was a CIA saw to meant to cut around corners without being seen. Cold war era $20,000 minimum :)

Re: Yard sale images- help? *LINK*

#20

Re: Dang you scored!

Dean Lapinel

Thanks Scott...yeah, I'm pretty "up" from this haul. Aren't tools great?