Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

how to read stanley inside rule #240?

Posts

how to read stanley inside rule #240?

#1

how to read stanley inside rule #240? 

David Miller from Iowa

I bought a 2-4 foot sliding Stanley #240 rule at a sale, on one stick the numbers start on the right and increase to the left, and the other stick they start on the left and increase to the right. Are the graduations on inside extension rules just supposed to be relative? Thanks David


Re: how to read stanley inside rule #240?

#2

Let me just say "beep-beep"

Bill Houghton, Sebastopol, CA

I can't help with your question, but I can admire your driveby gloat. Neat device - another thing to watch for in my wanderings.

Re: how to read stanley inside rule #240?

#3

Jack Guzman from Maine

Ditto beep-beep!

Jack Guzman from Maine

I want one of those. I've never heard of that tool but I sure could use one.---Jack

Re: how to read stanley inside rule #240?

#4

Re: how to read stanley inside rule #240?

Hank Knight

Cool rule. :) The left, brass-bound end of the top stick is the index. As you extend the bottom stick, the overall length is indicated at the left edge of the top stick. In the photo, you have the rule extended almost to the max. The reading is 4' 1 5/8" (approx).

Re: how to read stanley inside rule #240?

#5

Jim DeLaney, Austintown, Ohio

Re: how to read stanley inside rule #240?

Jim DeLaney, Austintown, Ohio

Hank,

I'm not so sure about that. Since the top piece is 2 feet, 2 inches long, isn't the reading shown 2 feet 2 inches + 2 feet 1-5/8 inches" for a total of 4 feet, 3-5/8 inches?

Jim D.

Re: how to read stanley inside rule #240?

#6

Re: how to read stanley inside rule #240?

Hank Knight

Jim, you may be right. I'd have to see the rule to be sure. My guess is that the first reading at the left end of the bottom stick is 2'2", the length of the rule completely closed, and that the readings on the bottom stick increase moving to the right to 4"2", the length fully opened. This leaves room for a two inch overlap in the middle to accommodate the hardware. But that's just my guess.

Hank

Re: how to read stanley inside rule #240?

#7

Jim DeLaney, Austintown, Ohio

Re: how to read stanley inside rule #240?

Jim DeLaney, Austintown, Ohio

You may be right, if the bottom stick starts at 2". Actually, that'd make a lot of sense. Maybe we can get a better picture?

Jim D.