Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

Making liquid hide glue.

Posts

Making liquid hide glue.

#1

Making liquid hide glue.

Paul Kierstead

So, I finally got some nice crystallized urea (very pure). Fired up the glue pot last night, mixed in some urea (15% by weight, i.e. 100g of glue + 15g urea). Mixed is up some, poured it out into a bottle. It didn't gel up as fast as regular hot hide glue. Left it overnight.

This morning, the 'liquid' hide glue had gelled up very firm. I placed the bottle in some hot water (ala Old Brown Glue) and it did indeed re-liquify readily. I tried some out, but will say it re-gelled on application somewhat; less so then hot hide glue at this temperature would (it would be unusable), but not easy to use either (gelled much faster then OBG).

I'd call this some success, but not a success . So, the questions, in case anyone out there actually has answers, is what I do different on the next test. I guess the first problem is causal.

- Not enough urea? Guidelines seem to be 10-30%

- Urea didn't dissolve in. Melting point of urea is >135 C; however, I assumed it could be dissolved in hide glue. It isn't necessarily easy to tell if it did.

- Needs cooking? This is some kind of protein modification (I think), so perhaps some cooking is required?

Anyone done this and have some thoughts?

Also, I'd be curious how Franklin gets a liquid hide glue that doesn't even need warming.

Re: Making liquid hide glue.

#2

Re: Making liquid hide glue.

Paul Kierstead

Hmm ... as a follow up, I may have misunderstood the common percentages; they seem to be 15% of dry hide glue flakes/granules; I did 15% of already mixed hide glue, which would be significantly less then 15% of dry. What, about 1/2?

Re: Making liquid hide glue.

#3

Re: Making liquid hide glue.

BilWil

Here is what has worked for me.

Modifications to Hide Glue

1. To make hide glue liquid at room temperature (longer open time / slower drying) add approximately 5 tablespoons of urea for each cup of dry glue.

2. To make hide glue waterproof add 1/2-1% aluminum sulfate.

3. To make hide glue flexible add approximately 5% glycerin (based on the weight of glue), with increasing increments of 2-3% to achieve greater flexibility.

4. To increase the � wetting properties� of hide glue add approximately 1% vinegar.

I don't think any of these proportions are absolutely critical. For example, in the winter when the shop is cold and the materials are cold, about 60 Degrees F. I have gone to as much as one half cup of urea for every cup of glue. I use mostly 192 and 251 gram strength.

Some sites to check out: http://lumberjocks.com/David/blog/7250

https://www.oldemill.com/cataloga-h.html

http://www.spurlocktools.com/id57.htm

Good luck.

Re: Making liquid hide glue.

#4

Re: Making liquid hide glue.

AZ in Colorado Springs

I have no experience with hide glue, but I see an error in the math. Fifteen percent = 15/100, and your formula was actually 15/115, or close to 13%. Your later post talked to a different understanding of the formula, leading to a lower percentage than you were aiming for, and maybe it was even lower than that.

Re: Making liquid hide glue.

#5

Re: Making liquid hide glue.

Paul Kierstead

Heh, it is partly a matter of interpretation. The instuctions typically go "add 15% urea", not make a 15% solution ... but, I didn't worry about it as percentages are often quoted as between 10 and 30%. I think I made something like 7% or less due to thinking I was supposed to add it to mixed Hide glue, which has a lot of water in it.

Re: Making liquid hide glue.

#6

Re: Making liquid hide glue.

Paul Kierstead

Ah, well last night I made some more up. This time I started from scratch, and mixed by dry measures, not mixed hide glue. I very gently warmed it to 140 F to help it all mix togather. Hours later it was still liquid. Excellent!! This makes me quite happy, now I can keep a constant supply of fresh liquid hide glue.