Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Catharine's been busy *LINK*

Posts

Catharine's been busy *LINK*

#1

Ellis Walentine

Catharine's been busy *LINK*

Ellis Walentine

As a courtesy to our new and returning advertisers, I like to post a note on the forum about their products and services. You'll be glad to know that Catharine Kennedy has been very busy engraving tools and other things for woodworkers and beyond. Have a look at the latest engraving jobs she has posted on her website. I hope you will consider how custom engraving might enhance your appreciation of some of your tools.

Cheers,

Ellis




Catharine Kennedy's Custom Engraving

Re: Catharine's been busy *LINK*

#2

EVERYTHING she does is STUNNING !

steve mackay

Re: Catharine's been busy *LINK*

#3

Re: Catharine's been busy

Dean Lapinel

Just gorgeous! Catharine's work shows matuartion in technique and style just from the few postings we have been honored with.

I have been trying my hand with a hand graver but I often wonder about the pneumatic palm gravers. What does Catharine use?

Re: Catharine's been busy *LINK*

#4

Re: Catharine's been busy

Catharine Kennedy

Delighted you like my stuff! And thanks to Ellis for the kind words and great web site work!

My teacher started me off with hammer and chisel- I've since gone to a GRS air powered graver- this is only power ASSIST- where it goes is entirely up to me and my hand... :D

Re: Catharine's been busy *LINK*

#5

Re: Catharine's been busy

Dean Lapinel

Catharine.

I have a nice collection of books on engraving and I have studied the techique and style for many years. You are really doing well. Your work is superb-

Re: Catharine's been busy *LINK*

#6

Re: Catharine's been busy

Catharine Kennedy

Thanks! I truly appreciate that! :D

Re: Catharine's been busy *LINK*

#7

Dean - what are some good books?

Chuck Nickerson

I'd PM you, but I can't figure out how on WC.

Thanks,

Chuck

Re: Catharine's been busy *LINK*

#8

Barb Siddiqui

Re: Dean - what are some good books? *LINK*

Barb Siddiqui

Dean may have many titles for you, but here is one I own by David Darom, with a long chapter on engraving and how to, plus home-made shop tools. It is a very enjoyable read.


Amazon:  'Custom Folding Knives'

Re: Catharine's been busy *LINK*

#9

Re: Dean - what are some good books?

Dean Lapinel

Hi Chuck,

Many of the knife books have examples of fine engraving...I won't list these

The first part of this list has tremendous samples of historical engraving..the last in the list are classic technique books. Meeks is probably the best known.

I also have many metalsmithing, jewelry making books that have chapters on engraving but here is the basic list:

Engraving metals (Haslucks�s �work� handbook series)

Gun Engraving- Christopher Austyn

British Gun Engraving- Douglas Tate

Custom Firearms Engraving- Tom Turpin

The Art of Engraving- James B. Meek (classic)

Engraving Metals: With Numerous Engravings and Diagrams. - Paul N. Hasluck

Engraving on Precious Metals- A. Brittain

Re: Catharine's been busy *LINK*

#10

I'd strongly suggest:

David Barnett - SW FL Gulf Coast

Drawing & Understanding Scroll Designs by Ron Smith, from GRS.

This book addresses proper scroll design and how to analyze and avoid design and execution errors so prevalent among self-taught or undertrained engravers: flattened and malformed curves, crowding, spatial inconsistencies, poor planning, ragged cuts and borders, incorrect shading, and the myriad other pitfalls too often found in beginner, and more egregiously, in much would-be professional work. It's an eye opener (and eye trainer) for consumers of engraving, as well, and may prevent uninformed purchases that may later disappoint, ruining a nice firearm, watch or other treasured object.

It's also a good idea to study the Lynton MacKenzie video/dvd set (rentable from SmartFlix), too.

Re: Catharine's been busy *LINK*

#11

Re: I'd strongly suggest:

Dean Lapinel

My bad...I forgot to list those. I also forgot the DVD set "An introduction to knife engraving with Ray Cover. Fair to good.

Re: Catharine's been busy *LINK*

#12

Ray's inlay koi knife...

David Barnett - SW FL Gulf Coast

in yellow, rose, and green golds is one of my all-time favorites.

http://www.rcoverengraving.com/

Re: Catharine's been busy *LINK*

#13

Why did I know you'd be lurking...

Scott Burr in Ben Lomond CA

and have the answers :D

Good to see your still alive.

I personally (that is) miss your posts ;)

Re: Catharine's been busy *LINK*

#14

David Barnett

More like hibernatin', Scott

David Barnett

But I've done far too little woodworking lately to have much to say. And what woodworking I've done, with the single exception of an eight-foot long workbench for a small machine tool room, tends to get covered by metal or skin or encaustic or who-knows-what. For example, I'm finally finishing a pair of floor-standing speakers I built over a year ago, covering them with with sixteen square feet of vellum (I misspoke and said 'parchment' on the other side). They say the mind's the second thing to go. The third, if you count my eyes.

Re: Catharine's been busy *LINK*

#15

Re: More like hibernatin', Scott

Dean Lapinel

Hey David,

GRS has a book I haven't seen. A larger book by Ron Smith. Have you read that one? Is it mostly a repeat of his first book with additions?

Re: Catharine's been busy *LINK*

#16

David Barnett

Advanced Drawing Of Scrolls - 2nd Ed.

David Barnett

"GRS has a book I haven't seen. A larger book by Ron Smith. Have you read that one? Is it mostly a repeat of his first book with additions?"

Dean, 'Advanced' is a must-have for serious engravers. I didn't mention it because a) it's somewhat pricey, although well worth every penny, and b) as its title suggests, technically and aesthetically 'advanced'. It's inspiring.

Ron's first book, Drawing & Understanding Scroll Designs, is a valuable introduction to scroll work (not my thing, actually), but is a mere didactic sketch compared to the 231 page Advanced Drawing Of Scrolls. I looked through the first edition (2005) but haven't bought a copy, although I should before it becomes scarce.

I wholeheartedly agree with your suggestions; Meek, Brittain & Morton, et al. The little Firearms Engraving Theory And Design is good, too, if a bit thin.

Re: Catharine's been busy *LINK*

#17

Re: Catharine & David

Dean Lapinel

I won't go into the reasons but I need assist with the graver and I'm considering GRS or Lindsay. Any comments or forums or reviews where I can get a sense of which one to commit to?

Re: Catharine's been busy *LINK*

#18

David Barnett

You say tomato...

David Barnett

Dean, I know people in both camps, but would unhesitatingly choose and recommend the Lindsay. If all I did was set stones, the GRS would be fine, but for bulino, I'd press hard for the Lindsay AirGraver. I really wouldn't be happy with anything less. Love my GRS MagnaBlock, though.

Really, it's more the hand and mind guiding the graver than which tool you choose, in most cases. Preference is a personal call. Some prefer Meiji optics. I prefer Olympus. I know I'm right, of course, heh.

Steve Lindsay's forum

http://www.engravingforum.com/

Sam Alfano's "Engraver's Cafe"

http://www.igraver.com/forum/index.php

"Fine Embelishment"

http://www.knifenetwork.com/forum/forumdisplay.php?f=46

(good place to search the archives for GRS vs. Lindsay)

Re: Catharine's been busy *LINK*

#19

David Barnett

By the way, I use hand pressure or hammer

David Barnett