Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Powder post beetles

Posts

Powder post beetles

#1

Powder post beetles

David Miller from Iowa

I just bought 10 planks, 12' long of 8/4 x 12" clear cherry - air dried for 30 years. However, when loading it I noticed some powder post beetle sawdust mounds - not a lot, but definitely there.

What to do? I would rather burn the wood than contaminate my lumber stash. Whatever I do it must be reliable.

Thanks, David

Re: Powder post beetles

#2

Set it on fire in the seller's yard? 

Pam Niedermayer - Austin, TX

Re: Powder post beetles

#3

Stephen Shepherd

or

Stephen Shepherd

if you can't bag them and put in a piece of dry ice to gas them, you can mix up a simple borax solution and soak down the planks especially where the holes are.

Stephen

Re: Powder post beetles

#4

Re: Powder post beetles

R.J. Whelan

David,

Because these planks are thick, long and wide I would recommend salvaging them.

I had occasion to buy some nice, old, salvaged pine about 12 years ago, but it was infested with termites.

I called an exterminator in my area and asked if they were going to be tenting and fumigating any homes in my area. They put me in contact with one of their customers and I made a deal to pay them $75 and put my pine in their garage during the fumigation.

When I got the pine back there was nary a living termite to be found.

RJ

Re: Powder post beetles

#5

Re: or *LINK*

Dominic in Buck's County PA

Second on the Borax solution. I use Timbor to get rid of PPB when a section of my newly installed fence turned out to be infested. I also had an occasion to test it out on some PPB infested red oak and ash. It got rid of them in both occasions.


Timbor Wood Preservative

Re: Powder post beetles

#6

Is the wood dry?

Dave Thompson

Piles of dust are a sure sign, but how old they are is relevant too. What really matters is how dry is the surface of the wood, and how dry your stock is in the vicinity. Dry wood will not take to a new infestation. Eggs aren't laid on dry stuff because new hatched grubs won't survive. Mature grubs are more tolerant, and may survive their cycle while the wood is drying, though when they emerge, if they wood has since dried sufficiently they won't re-infest.

If you have green wood, or wood exposed to moisture, I would be concerned. If all your other stock is dry (air dry is fine), I wouldn't worry about it. I don't remember the threshold numbers, but I do recall wood with 12% MC is safe, e.g. air dried.

First time I bought wood with PPB's, I used borax. I wasn't too happy with how it left the surface of the wood for finishing. Next time, I encased a pile of wood in black visqueen and let the sun sizzle them, i.e. red neck solar kiln. Now, so long as I don't have any other wet wood around, I just sticker the stuff in a dry place and let it sort itself out.

good luck,

Dave

Re: Powder post beetles

#7

Re: Powder post beetles

gregforster

Not 100% on topic, but... why does there seem to be a greater incidence of PPB in English tools?