Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Food safe finishes

Posts

Food safe finishes

#1

Food safe finishes

Bill Houghton, Sebastopol, CA

The following recipe for a drying oil, from the 1928 "Popular Mechanics Shopnotes," explains to me why people ask about food safe finishes:

"to 1/2 gal. of water add 1 lb. of sugar of lead (poison* - lead acetate). Shake occasionally, and when the lead is dissolved add 2 qt. of water; then filter the solution and add 3 gal. of raw linseed oil. Stir in 1 lb. of powdered litharge [for those not up on their arcane terminology, this is lead oxide, PbO], shake it often and then let it stand for several days. The oil found on top will be the drying oil..."

*Thoughtful of them to mention it; note that they don't say anything about the second lead compound in the recipe.

Re: Food safe finishes

#2

So that's why people get "lithargic" - it's poison

Bruce, a MN Galoot

Sorry. couldn't help myself :D

Re: Food safe finishes

#3

Re: Food safe finishes

Alexandre Grigoriev

The difference is that water-soluble lead acetate will leach into your skin. Lead oxide won't. But it will still be dangerous to inhale its dust.

Though these are pretty safe compared to dimethilmercury. http://en.wikipedia.org/wiki/Karen_Wetterhahn

Re: Food safe finishes

#5

Re: but...

Frank D. in Montreal

That'S been the common blurb for some time, but I'm not sure it's true, Scott. The plastics industry said the same thing about plastics for decades...now it turns out that many plastics can pose health hazards, not to mention vinyl that leaches lead...I would never trust a finish with heavy metals in it.

Re: Food safe finishes

#6

I totally agree...

Scott Burr in Ben Lomond CA

Wouldn't go near it myself.

Scott, who has cashed his Nagline water bottles for stainless steel.

Re: Food safe finishes

#7

Good move Scott

Bob Hackett

When you make the switch,and if you`re a bottled water person you will sooner or later,just be sure that what you`re switching to is NOT aluminum and that it has at least a SS lined cap.Why trade out of plastic in the bottle only to use a plastic cap?

Another tip is to get one with a large enough hole on the top to put one of those key ring clips that look like a carabiner thru.That way you can clip it to anything you want instead of having to loop your finger thru the hole and carry it and it also comes in handy to clip the cap onto the rim of the bottle while drying after washing so you don`t lose the cap.

Can you tell I have a strong dislike for plastic?Especially plastic that ends up in landfills?

MB-Respecting the Mother