Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Some recent projects

Posts

Some recent projects

#1

Some recent projects

Scott Burr in Ben Lomond CA

Well I've got a good bit of shop time lately as I look for a new job. Here's what's coming out of the shop.


This is a bread board for the LOML. It's Bird's eye maple with Coco bread board ends (fitting I think) draw bored with ebony pegs. No finish.


I got sick and tired of trying to scrape paint off some windows with those evil cheaply made single razor blade holders. So a scrap of walnut, a utility knife blade and a screw with a wing nut and bingo a scraper that actually scrapes.


I got Schwarz. Made these for fun and to see how accurate I could get them.

They turned out better than I thought. They won't replace my engineer squares , but they'll work out well for wide boards. Made form QSWO with purple heart and Jarrah.






Here's a saddle square in walnut and brass making the hinge was a lot of fun.




To me this is one of those "why didn't I think of that" projects. If your like me, tracing a handle of other curved object can be a real pain in the butt. I found this in a 2009 Pop WW mag. It works great.

Well back to shop. Thanks for looking :)

Re: Some recent projects

#2

Re: Some recent projects

Derek Cohen (in Perth, Australia)

Hi Scott

Those are terrific. And well done on the saddle square - I appreciate how difficult to make that one is. Looks much nicer than the one I made.

Regards from Perth

Derek

Re: Some recent projects

#3

Nice work Scott...

John in NM

Bread board ends on a bread board.... kinda like making a wheel or something :D

I love that curved object tracing tool.... I'll have to make one, as that is a constant problem that I'm always doing, not quite good enough.

neat stuff

Re: Some recent projects

#4

Cool stuff

roninkokomo

Re: Some recent projects

#5

scott grandstaff

Jumpin Hot Work!!

scott grandstaff

I would love to see that board in person!

Got to love it when a plan comes together

yours Scott

Re: Some recent projects

#6

Re: Some recent projects

Wiley Horne--So. Calif.

Hi Scott,

I admire your work, and I admire your gumption too. Everybody needs one of those paint scrapers. But that saddle square is just killer!! How did you go about making the matching brass hinges? Especially the convex one that is incised in the bargain.

Wiley

Re: Some recent projects

#7

Hi Wiley, It was quite easy...

Scott Burr in Ben Lomond CA

The hinges were cut in the wood prior to adding the brass sides. Then it's a matter of a lot of filing and a little work with a grinding wheel on a Dremel tool.

Re: Some recent projects

#8

Regardless of easy or not

Bruce, a MN Galoot

those are some fine looking projects.