Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

My workbench......

Posts

My workbench......

#1

My workbench......

Edward in Vancouver


My "everyday" workbench...

Standard spruce construction base, wedged through mortises--got the Idea from Schwartz's sawbench a few years back. Stretchers are "inspired" by Ikea beds--each stretcher has two 3" long 1/2" steel rods running vertically a few inches from the edge in. Two holes are cross drilled and tapped in the rod to accept 1/4"/20 bolts. Fairly rigid and easy to knock down.

First bench has a solid maple top--salvaged from two baker's tables--second one is beech from Ikea. Drawer unit was made from leftovers of an oak flooring project, the drawers ride on glides but don't have bottoms, a standard restaurant "hotel pan" fits in instead, and can be removed and tossed in the d/washer when needed. Benches are about 3 years old now.

Re: My workbench......

#2

Stephen Shepherd

Re: My workbench......

Stephen Shepherd

Edward,

Great idea for the drawers, to be able to dump the entire contents is a wonderful possibility, might be able to actually find things. I have avoided drawers in the workshop for that very reason.

How is the Ikea beech top made? Narrow laminated pieces? I was wondering if it would be a good source of beech for other projects?

Stephen

Re: My workbench......

#3

Re: My workbench......

Edward in Vancouver

It's a bit over 1 1/2" thick, narrow strips that are finger jointed, but usually the strips are a good 4' long. They also have the same countertops in oak and birch too, 24" and 36" widths, and quite a few lengths.

All the countertops in my cafe are beech, and I went cheap(crafty) and made my own cafe tables with used steel pedestals and 24" dia. beech tabletops.

Re: My workbench......

#4

Re: My workbench......

Bob Hackett

I like it!Sounds like it`s built more like a real world tool rather than furniture.

Many common sense approaches at work here.I especially like the knock down hardware and the drawer construction is something I`ll be looking toward doing on the next build.

Thanks for posting it.

MB

Re: My workbench......

#6

Re: What no vise?

Edward in Vancouver

Vice?

Oh... yeah, I've got several.

They're in a cabinet beside the bench

I've got Kirsch (for pastry use only), Brandy (for baking only) Whiskey (for whiskey truffles only), Grand Marnie.....

Regards,

Edward

Re: My workbench......

#7

Whiskey truffles!?!

Scott Burr in Ben Lomond CA

Ed how did you know :D . I love a good confectioner!

How the Olympics treating you? Hopefully as good as the lady hockey team ;)