We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
What a pain. I get the e-mail on the Veritas� Detail Rabbet Planes
and now I have to order them. I don't need them. I'll probably use one or two of them but they are so darned adorable. Jimminy...will you slow down on making these things?
I'm still busy pining for the skew rabbets, the iron edge-trimming planes, and the small shoulder plane. Got no energy left to lust after anything new.
I see 6 but it says you get a deal on the set of 5? They look like something you would build a case made of the finest lumber you have and put them on display.
Every VW mechanic who worked on the old air-cooled VWs - which is to say, everyone who ever owned one of them* - knows that 5/16" and 8 mm are so close as to be interchangeable (8 mm is 0.00004" under 5/16", if I did my math right). So LV can sell one plane for both these nominal dimensions. There are a couple of references to this in the text, including "Available in five widths, 1/4", 5/16" (8mm), 3/8", 6mm, and 10mm..." toward the bottom of the explanatory text.
*Wandering OT: the saying, back when you could buy an air-cooled VW new, was that they were great for learning how to fix cars. This was true, at least partly because they gave so many, many opportunities to learn.
Bill, who shared custody of our first VW bus, Olga the Box, 40 hp motor, 15 miles per hour up Waldo Grade approaching the Golden Gate from the north - but carrying five hitchhikers and a dog - and who made it almost all the way from SF to Philadelphia carrying 200 pounds more than her weight (and would have made it all the way, if the mechanic who had fixed her back in SF hadn't skimped on parts replacements); and who, with my sweetie, could R&R the motor and replace the clutch in under 30 minutes with limited tools and blocks of wood.
I bought that great small shoulder plane and it's wonderful little case. I have LN edge trimmers but I'm sorry I missed out on the discount for the two skew planes. I was on the fence and hesitated too long.
they'd come out with O-1 blades for them. I have put in the request to them, but I think there needs to be more demand (or if the big guy says so...please Rob!).
Long time no talk...hope all is well with you and your family.
Sorry if my comment was confusing, I was referring to LV's small plow and the skew rabbet planes, not the new detail rabbets. I just prefer O1 steel and have asked if they would consider offering them in these planes, too. I like the edge I get better and it sure is a lot easier with my oil stones. I have switched my LV spokeshaves and the few L-N planes I own to O1 blades.
Any new projects in the shop...did you finish the chess tables you were making a while back?
I'm actually on your side here... I prefer O1 as well...
The new skew blocks will be available with both A2 and O1, and I'll prod our folks to do the O1 for the skew rabbets too... the plow I'm not so sure about though.... that's a LOT of blades and inventory.
Sorry you asked. They're right where you last saw them, stacked on top of each other on the "spare" bench. But thanks to Stephen Shepard via a Hand Tool Chat some months ago, I have a plan to complete the veneered backgammon well that goes beneath the chess board top. It requires warmer weather, some cauls, and spring poles between the ceiling and the cauls - (which have a clever name -some kind of dogs?- that eludes me now...).
Meanwile shop projects roll by: my ubiquitous chair & stool projects plus some 18th century reenactment parephernalia (which includes a flintlock).
That's great news about the new skew block planes...I know I've seen a photo out there somewhere, but any chance you can post one again?
I would also love for you to offer the skew rabbets with O-1. I totally understand about the plow and it's probably not as large a deal for me there as they are smaller blades. I just didn't want to order something in A-2, only to then have you come out with O-1 blades and I have to swap them out. I just did that with my shaves and it was actually easier to sell my old ones and buy all new ones than to just buy new blades for them. Of course, that is also a tribute to how well LV tools hold their value!
You guys are truly amazing with the quality of your products and your people-keep up the great work! And I am not interested in any odds on another Canada/US game...
as I can't tell you how many unfinished projects I have (including the carved nativity set for a couple's wedding gift...and they just celebrated their 3rd anniversary!). Both kids in High School now (one is a senior) and between not wanting to miss that (and sports), along with work commitments, just not enough time in the day. Tell Joanne that she would be happy to know that I picked up playing the guitar again after 25+ years and have joined our folk group...never too old to get back to what you love!
Hope things are well with the brood and keep in touch. And the first one to finish one of these old projects gets a new stash of black locust wood!