Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Urban Salvaged Hardwood Slabs, Milled In-House from Rare Trees. Shop Unique Walnut Stock.

OT Compressed Gas Cylinder Question

Posts

OT Compressed Gas Cylinder Question

#1

OT Compressed Gas Cylinder Question

David Miller from Iowa

In the before time (pre 2008) I was a consultant and one of our mantras was �If I have heard of the service I can provide it� i.e., secure the contract and figure it how to do it later. In that spirit, I have just accepted a commission to construct a �yard gong� consisting of 3 bells made from compressed gas cylinders that play the �NBC chimes� (G3, E4, C4).

I was pretty good in physics and music and, based upon the easy confidence of the unconsciously ignorant, have some belief I can get the tones right though trial and error. However, I first need to secure the cylinders.

Can you folks give me some tips on this?

Where best to get the cylinders? Welding gas suppliers, beer suppliers, scrap yard? Do they sell �decommissioned� cylinders?

I presume that it would better to take an abrasive saw to an inert gas cylinder than a flammable gas cylinder, but I have to, can a flammable gas cylinder be made safe to cut?

Thanks, David

Re: OT Compressed Gas Cylinder Question

#2

Re: OT Compressed Gas Cylinder Question

Marv

David,

It seems to me it would be safer to use the oxygen type bottles and just make sure they are empty. I've seen them used for gongs. They sure have a nice tone. I would look for a scrap yard that has lots of industrial stuff. Keep in mind there are lots of different sizes. There isn't much that can go wrong with those things. They are very well made. Good luck finding some that are cheap. You can buy new ones but they sure aren't cheap. If they have an identification number stamped into the top area, they are the property of the original company who first filled them. They get passed around from company to company. I once bought an acetylene outfit at a flea market. When I took the bottles to be refilled, the gas comapany kept them, telling me they didn't belong to me. I learned right then, to my surprise, about the strict laws that control the ownership of those things.

Take care,

Marv

Re: OT Compressed Gas Cylinder Question

#3

Obtaining cylinders

Bob Hackett

Some places to look off the top of my head.

Welding supply house,they have cylinders that are no longer fit for service or know where they are sent.

Dive shop,if they fill cylinders then they either test them or send them out to be tested.They will know where the failed cylinders go.

Hospital supply/med rental,the oxygen cylinders also must be tested and they will probably know where the failed ones go.

Local fire department,the tanks for their Scott-packs require testing and replacement.Ask them where the old ones go.

Mt Everest,there are alot of scrap cylinders just laying around just waiting for someone to put them to use.

I`m serious about this!My friend Jeff Clap imports them and turns them into bells just like you plan to do.He used to have a web site,something like"Bells from the top of the world" and sold them to climbers and the corporations that sponsored them.

Just as a safety caution,I would only use cylinders that held either oxy or an inert gas and that came to you marked as such.I would also only accept a cylinder that had the valve removed from it.

I saw a post on another forum that had pics of the aftermath of someone putting a wrench to a valve on a supposedly empty portable oxy cylinder(the type folks wheel around with them).The explosion buried the tank top into the far wall and took the fellow`s arm with it.By his own admission,get got off lucky.

MB