Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Slightly OT - What is this tool.

Posts

Slightly OT - What is this tool.

#1

Slightly OT - What is this tool.

Pat Riley

>No one in my family knows what this tool might be. It was stored with other items - lid lifters etc. - that were kept with my Great Grandmothers wood fired cooking stove. It may just be a cooking utensil. I think it may be something that went alone with operating the stove.

I told my mother that one of my good friends here at Wood Central would know exactly what it is.

Sorry about the poor quality picture, it was a quick one off my phone.Any help would be greatly appreciated.

Pat


Re: Slightly OT - What is this tool.

#2

Re: Slightly OT - What is this tool.

Wiley Horne--So. Calif.

>Hi Pat,

It's a trivet. Grandma lifts a pot of stew off the wood-fired stove, and needs to set it down somewhere, where it won't scorch a wooden table or lift the paint. Where does she put it down? On the trivet.

Maybe someone else knows where and when it was made.

Wiley

Re: Slightly OT - What is this tool.

#3

P. S.

Wiley Horne--So. Calif.

>This one could also have doubled as a place to set down a hot pressing iron. What size is it?

Wiley

Re: Slightly OT - What is this tool.

#4

Jack Guzman from Maine

neat gadget

Jack Guzman from Maine

>I'm sure Wiley is right.Where I live people still use wood fired cook stoves. We do in the winter. I've never seen a trivet like that one though. ---Jack

Re: Slightly OT - What is this tool.

#5

Stephen Shepherd

Re: Slightly OT - What is this tool.

Stephen Shepherd

>It is a pot scrubber. I have one, this predates brillo pads.

Stephen

Re: Slightly OT - What is this tool.

#6

Pot scrubber?

Bob Hackett

>Why for using trivet to scrub pots,you?

Me use mine handy bambooz pot scraper for that kind drudgery man!

Sharp edge beat round ring fighting grunge,even burnt corners be happy here.

Make Momma smile wide!

MB-using his " Jolly kitchen voice" persona

Re: Slightly OT - What is this tool.

#7

Yep, pot scrubber.

Leon

Re: Slightly OT - What is this tool.

#8

Jack Guzman from Maine

Rug Beater?

Jack Guzman from Maine

>My first thought was a rug beater but trivet makes more sense to me.---Jack

Re: Slightly OT - What is this tool.

#9

Stephen Shepherd

Yep, pot scrubber. *LINK*

Stephen Shepherd

>It is in fact a pot scrubber.


http://www.invertedeye.com/item_238/Chainmail-Pot-Scrubber.htm

Re: Slightly OT - What is this tool.

#10

I stand corrected!

Wiley Horne--So. Calif.

>Holy Cow! I'm glad I didn't have a chance to make a bet on that--would've lost big.

Stephen, you never cease to amaze me with your breadth and depth of knowledge of 19th century sociology. I'm greatly enjoying your glue book and your old tools book (both from Joel) for exactly this reason.

Wiley

Re: Slightly OT - What is this tool.

#11

Wait a minute!

Bob Hackett

>That person was only told it was a pot scrubber!I want to see the credentials of the person who told them that.

I have a feeling that if you tried to scrub anything with that then A-it`d get wadded up around the handle,B-It wouldn`t get into the corners, and C-I`m still not convinced.

What`s to keep me from saying it`s not a clam strainer and that you hang the lead ring off that bent nail next to the sink while holding the can in one hand and the handle in the other and the reason it was produced is because it was easier to store than a collander?

Or a ferret training device or a collapsible pocket fly swatter or a trivet for that matter?

MB-Still unconvinced by the online sales description that we all know are always exhaustively researched and factual.

BTW-I`m also wondering what a man who runs from iron planes is doing with a metal pot scrubber?Shouldn`t you be using a handful of sand and a stub of a whisk broom or something along those lines?;^)

Once again for those with limited sense of humor this is ALL said in jest and meant to bring a smile not a frown.

Re: Slightly OT - What is this tool.

#12

Stephen Shepherd

Re: Wait a minute!

Stephen Shepherd

>'BTW-I`m also wondering what a man who runs from iron planes is doing with a metal pot scrubber?Shouldn`t you be using a handful of sand and a stub of a whisk broom or something along those lines?;^)'

I just happen to own one, so I use it for its intended purpose. Take a greasy iron pot, put in some hot water and wood ashes and swirl around with the pot scrubber over a fire. The grease turns to soap (reacting to the wood ash) and cleans the grease. The handles keeps you from getting burned, although they do exist without handles.

Scouring Rushes [horsetails] also work for those stubborn spots.

Stephen

Re: Slightly OT - What is this tool.

#13

Stephen Shepherd

Thanks Wiley 

Stephen Shepherd

Re: Slightly OT - What is this tool.

#14

Re: Slightly OT - What is this tool.

Marv

Pat,

Looking at the thing in practical terms, it looks like it's quite floppy and loose. Using it to scrub a pot would be difficult if not just silly considering that you really couldn't use the handle because the rest of it would just flop around and do very little in the way of scrubbing. It makes so much more sense to use it to help keep a pot of cooking beans on the stove by creating a space between the pot and the stove top. If used for that purpose, the handle actually becomes a useful part of the implement.

Marv

Re: Slightly OT - What is this tool.

#15

Ellis Walentine

And he got $110 for it!

Ellis Walentine

Re: Slightly OT - What is this tool.

#16

Now Marv

Bob Hackett

That`s why it`s made out of rings that size.

It`s actually meant to be used to scrub the exterior of a pot and you loop your finger thru that lead ring(the one you formerly hung over the bent nail next to the sink when you mistook this for a clam strainer) and hold the handle in the other hand and use it like a shoe shine rag to scrape all the camp fire gunk off the outside of the pot.

Unfortunately these were originally sold as a set and the inside scrubber was worn out first as the trail cooks were always pressed for time and in a hurry to break camp so they often cut corners and only washed the insides of the pots.

I can only imagine what this would have brought if it had been part of complete trail set.

Just before production was ended an enterprising trail boss who was rather disgruntled when he found that scrubbers were only sold in sets and that his cook had so many extra exterior scrubbers hung in the wagon that the noise was scaring the horses decided to devise a combination self leveling scraper and ring tensioning device to hold the exterior scrubber extended and allow it to be used for both interior and exterior work with this simple attachment.

Unfortunately his invention was eclipsed by a completely new patented device by a Mr Brillo.

Hey now,I was alright till Marv came along!It`s at least half his fault now.;^)

MB-Who is too tired to either duck or run.

Re: Slightly OT - What is this tool.

#17

Another one just like Pat's *LINK*

Wiley Horne--So. Calif.

Dead ringer for Pat's. Goantiques says late 1800s, early 1900s.

Wiley


Iron pot scrubber

Re: Slightly OT - What is this tool.

#18

Now Bob....

Marv

As a kid, I witnessed first hand how the trail cooks maintained their cookware. Basically they didn't. If by chance they got overwhelmed with the urge to clean, which was maybe once in a blue moon, they used sand to clean the inside of their pots. They couldn't care less about the outside. Actually, they didn't "scrub" the inside, they merely wiped out the big chunks and claimed that the coating that was cooked onto the sides preserved the metal and added flavor to whatever they used the pot for. They pretty much avoided new pots because the amount of time it took to "break them in" as they called it. Remember the old iron skillets? A good cook would shoot anyone who attempted to clean one of their well broken in skillets. Cleaning one was just a matter of wiping them out with a Brawny paper towel.

The item Pat is asking about is a stove top trivet.

That's my story and I'm pot-sticking to it. ;)

Marv

PS....anyone want to discuss "chamber pots"? Ok, I didn't think so. :D

Re: Slightly OT - What is this tool.

#19

OK,ya caught me.

Bob Hackett

Hard as it is to believe,I made it all up.

I also am familiar with the"trail cooking" approach from my days in the oilfield.

We were supposed to be working 7 days on and 2 off but during the boom were lucky to get 2-3 days a month off.We`d go for weeks living out of the cab of a truck and not seeing a town unless we drove thru it on the way to the next job.Our cookware was usually just "washed" with sand or rinsed in the nearest stock tank along with our coveralls and ourselves.

A "seasoned" skillet or dutch oven was NOT to be messed with and the designated "cooks" rarely let them out of their sights.

We experimented for awhile with cooking on the motors of the rigs while driving but went back to crew style meals prepared by one cook while the rest of us worked.

For the main course BBQ was usually king.I managed to whip up a nice grill that latched closed and set up in a stake pocket for use.Sold afew of them to other crews and some of the rig hands.

Never saw a "pot scrubber" in any form out in the " Oil Patch".

We did go thru hand cleaner by the gallon though.Used it for everything from laundry soap to shampoo.

We also went thru rags by the boxload,usually swiped them from the rig or the pumper`s truck.

MB

Re: Slightly OT - What is this tool.

#20

PS

Bob Hackett

Chamber pot?

Is that something akin to a cat hole?

MB

Re: Slightly OT - What is this tool.

#21

Re: PS

Marv

Shame on you Bob for taking us so far off topic.... :|

So, anyway...a champer pot in our house on the old farm up in Washington state was a large kettle with a lid that only my Mother used. The rest of us had to wade through snow sleet and ice to the outhouse over a block from the house. One of my chores at aged six was to empty that stinking thing. I was so short I had to carry it with both hands which put it about chest high. When I think back on that experience, I have to wonder why I always left the lid at the house.

To bring this discussion back on topic of wood, the outhouse was made entirely of wood and completely hand made. My Grandmother who lived down the road a piece had an up-scale outhouse that I really envied. It was a two-holer, a big hole plus a small one for kids.

One day I was sitting on the little hole and She came in. While she was trying to get her overalls down, she accidently dropped a quarter down her big hole. Then she took a dollar out of her pocket and tossed it down the hole. I said, Grandma, why did you do that? She said, "ya don't think I'm going down in there for a lousy quarter do ya? :D

Cat hole? I've never heard of a Cat hole, at least not in reference to a chamber pot anyway. :\

I can relate to some degree to your grubby life style in the oil fields. I grew up in the milling and logging industry in Oregon with a bunch of hard work'n snuff chewing Swedes. Good people though, some of my fondest memories.

Marv

Re: Slightly OT - What is this tool.

#22

Off topic?

Bob Hackett

I just figured since this started with a metal kitchen implement then just about everything is fair game.:^)

A cat hole would be a hole dug in the ground used for the same purpose as the outhouse.

It was not uncommon to drive down a lease road and see one or more oilfield workers sitting on their coveralls wrapped around the second strand of a barbed wire fence holding the post with one hand and waving with the other while using a cat hole.

Can`t help you with the steering it back toward wood thing.Trees only grew around riverbeds in north Texas and the drillin` rigs tended to stay well away from those both because of the water and because the tornados tended to travel along them.

We used to hang our hammocks either between trucks or under the trailers,that`s where the shade/shelter was.

MB

MB

Re: Slightly OT - What is this tool.

#23

My cousin Bill

Bruce, a MN Galoot

half-Swede that he was, grew up in the fishing industry in Seattle. He was fond of saying that he was 21 before he learned that "dumb" and "Swede" were two separate words :D

Bruce, only 1/4 Swede.