Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

new fret saw

Posts

new fret saw

#1

new fret saw

Catharine Kennedy

>This is a new, very lightweight aluminum fret saw that works a treat for cutting metal- the blade faces the operator and the material is moved into in- the support frame keeps the proper angle (90 degrees or whatever). So with all the plain metal, I couldn't help myself and started the embellishments... :D

Re: new fret saw

#2

Someone needs to come up with a new phrase

Bill Houghton, Sebastopol, CA

>"Over the top" (in the most positive connotation of that phrase) seems SO inadequate.

I am reminded of the Edwardian machines, with carefully applied pinstriping added to beautifully finished castings.

Interesting tool, and your work on it will add a nice aesthetic bonus to the owner's day.

Re: new fret saw

#3

Re: Someone needs to come up with a new phrase

Catharine Kennedy

>Since I am actually the owner, and this is the side mostly facing me, I'm real pleased!

Thanks for your comments!

Re: new fret saw

#4

Re: new fret saw

Marv

>Catherine,

Very nice!

How does it work? Do you move the work piece up and down. It appears that the blade is stationary.

Did you buy it at a website? If so, can you share?

Thanks,

Marv

Re: new fret saw

#5

Re: new fret saw

Catharine Kennedy

>http://knewconcepts.com/ is the site.

The support guides the fret saw which is moved up & down, in place, therefore the material is what moves forward or around, as necessary. Takes a bit of getting used to working this way, but much easier as it goes along!

Re: new fret saw

#6

Re: new fret saw

Marv

>Thanks Catherine,

Would love to have one just because it's so different. I bet you'll make good use of it.

Your's no doubt works even better with the personal embellishments ;)

Marv

Re: new fret saw

#7

Re: new fret saw

charlie belden

>What, no wriggling?

There was a time when all tools were embellished. I've played with cast iron kick presses with raised sculpted acanthus leaf patterns cast right into the cast iron. And most had a black lacquer finish - often with gold leafing "pin striping".

You are carrying on an old and wonderful tradition - and doing it very nicely.

So when are you starting on power tools - like the table top of a table saw - or an old

Big Enough To Land A Plane On Oliver joiner/jointer?

Nice stuff.