Drawboring
Derek Cohen (in Perth, Australia)
>I have added a second pictorial to the Mortice-and-Tenon primer: Drawboring.
The link is here: http://www.inthewoodshop.com/Furniture/Drawboring.html
Regards from Perth
Derek
Knowledge You Can Build On — Est. 1998
Drawboring
Derek Cohen (in Perth, Australia)
>I have added a second pictorial to the Mortice-and-Tenon primer: Drawboring.
The link is here: http://www.inthewoodshop.com/Furniture/Drawboring.html
Regards from Perth
Derek
Re: Drawboring
Pam Niedermayer - Austin, TX
>Great article, Derek. In reading it I finally figured out what really bothered me about the pegs: they're round instead of square (or diamond) shaped. I don't know for sure that square would be more appealing to me, nor that anyone else would agree with me; but given the diamonds and generally rectangular shape, I'd certainly want to try some square peg ends.
Pam
Pam
Re: Drawboring
Derek Cohen (in Perth, Australia)
>Thanks Pam.
You know, it never occurred to me to include square pegs!
Regards from Perth
Derek
I have yet...
http://McKay
>I have yet to be successful in making my own dowels. I have the dowel plate. I have rived the darn things and I still have problems.
Re: Drawboring
Vince G
>I'm curious about the haunched tenon in the very last photo of the article on your Web site. Do you cut that haunch short the same distance as the offset of your two holes, in anticipation of it being drawn in to fill the groove by the action of driving the dowel? Or do you cut it somewhat less short than the offset, in anticipation of it being drawn in a bit, but not that much? Or do you not cut it short at all, anticipating that driving the dowel will have little effect on it?
Re: Drawboring
Derek Cohen (in Perth, Australia)
>I'm curious about the haunched tenon in the very last photo of the article on your Web site. Do you cut that haunch short the same distance as the offset of your two holes, in anticipation of it being drawn in to fill the groove by the action of driving the dowel? Or do you cut it somewhat less short than the offset, in anticipation of it being drawn in a bit, but not that much? Or do you not cut it short at all, anticipating that driving the dowel will have little effect on it?
Hi Vince
I size everything to fit when dry. The amount that the joint will compress when drawn together is really small - not really measurable.
Regards from Perth
Derek
Great, thanks.
Vince G