Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Stanley planes

Posts

Stanley planes

#1

Stanley planes

Rick Snyder

>Hello,

For all the powers that I have in my shop, I am now leaning toward work with hand tools. I have a Stanley #3 (Bailey Style) that I got from my Dad a few years ago before I was interested in hand tools.

The infomation that I've read about planes they seem to always reference the #4 or #4 1/2. What about the #3 ? Also, where can I buy plane parts for this plane, I need a new lever cap screw and a tote screw. The tote itself was broken and glued back together. All the other parts seem to be in good shape. I would like to use this plane with my shooting board. Any information would be great!!

Thank You , Rick Snyder

Re: Stanley planes

#2

Jack Guzman from Maine

Re: Stanley planes

Jack Guzman from Maine

>Hello Rick,

A #3 is a good little plane.It's a nice size for a smoother.The #4 is just bigger and more common. Parts are pretty easy to find for most of the stanley common planes.Bedrocks are a slightly different story. Ebay is where I usually look. Also someone here may have a few spare screws layin around.---Jack

Re: Stanley planes

#3

Jim DeLaney, Austintown, Ohio

Re: Stanley planes

Jim DeLaney, Austintown, Ohio

>The #3 is a great little smoother. It just lacks the heft, and therefore the momentum, of a heavier #4 or even heavier yet #4�.

The #4 has a wider (2") blade, and the 4� is wider still at about 2 3/8" so they both take somewhat bigger bites.

I have several #3s among my collection, and I use them frequently. For the bigger jobs, though, it's almost always the 4� that I reach for.

Jim D.

Re: Stanley planes

#4

Jim DeLaney, Austintown, Ohio

Re: Stanley planes - Parts *LINK*

Jim DeLaney, Austintown, Ohio

>Forgot to mention in the other reply that many common parts are available (new) from Highland Woodworking. For older parts, or the more uncommon ones, Ebay might be your best bet.

I think Patrick Leach usually has some parts to sell, too.


Patrick Leach's Superior Toolworks Page

Re: Stanley planes

#5

Re: Stanley planes

Bill Tindall

>I for sure am not the hand plane expert on this Forum, but as a user of hand and power tools my use of planes might be closer to yours than some here. I have a #3 that I bought some time in the very distant past when I thought I should own a plane but didn't know how to use one. I never have or will ever use it. It is too small. I have a 4, 41/2 and a 5 and the plane I seem to mostly reach for when I need to shave a bit of wood off here or there is the #5. The 4 1/2 would be useful for surface planing but my interest in surface planing lessened when I found that an expensive plane was nearly as prone to tearing out chunks of wood as what I had been trying. The 4 1/2 is too clunky for planing edges or whisking a bit of material off this or that. I don't like any of the Stanley planes for a shooting board. There isn't a nice place to hold on to them. But if I had to use one it would be a 5 or 6. I think weight is important in a shooting plane.

For what it is worth, the utility of a plane is highly dependent on your ability to properly sharpen it.

Re: Stanley planes

#6

Re: Stanley planes *LINK*

Bill Houghton

>Stanley Works still carries a lot of the parts, at surprisingly low prices. Be aware, though: their shipping rates make up for their parts prices, so order everything you're going to need at once.


http://www.stanleytoolparts.com/

Re: Stanley planes

#7

Offer

WoodburnBob

>I'll send them to you, Rick. Confirm you need the large screw used as a fulcrum to hold down the lever cap (it screws into the frog) and both the brass head and adjoining double threaded rod for the tote. Actually, you may need to tell me the approximate "type", as it's possilbe the length of the tote rod may differ by type. Can't remember. Anyway, if what I send isn't right, I'll help you get it right.

Send me an address to woodburnbob@yahoo.com and I'll mail them to you in an envelope. It's an email I seldom use, so if I don't see a reply in a couple of days, the next time I'll check may be next year.

The #3 is a great choice. I collected about 40 of them some years back as part of my addicition to rust in those days, just before the market price dropped by half. They generally sell, or sold, at a mild premium to the #4. I'd much rather use a #3 for an hour than a #4. I thought I'd keep the 40 and sell them off a few a year in my old age to pay for Geritol and Viagra. I missed the target on that one.

Study the "RJs Rules for Tuning", which I assume is still in the articles section, and you'll have as good a plane as any, almost.

Bob

Re: Stanley planes

#8

I love my #3 (two of them, actually)

Bruce, a MN Galoot

>I didn't have one for the longest time and thought I'd pick up one while we were in Lancaster, PA, a few years ago, just to fill out the set. It has become one of my favorites. Mine was a Sweetheart era plane with matching iron and it takes a great edge. The light weight makes it easy to use for long stretches. I liked it enough to pick up another. Might get another this weekend at the Cabin Fever meet.

However, for a shooting board plane, I'm with Bill and use either my 6 or 7, usually the 6.

Re: Stanley planes

#9

scott grandstaff

Re: Stanley planes

scott grandstaff

>You choose your plane to fit your work and your body.

If you are 6'10" and 325 you aren't going to fit into a #3.

If you are 5'11 and under 200 and fairly small hands (glove size 8),

and much of your work is in a smaller scale,

its going to fit like a tailor made glove because that is me and I have used one for 35 years now.

If all your work is on conference tables and assorted arks, though.

Even if you are the same size as me,

you will need a bigger plane much of the time.

Scale, its always with the scale, we work.

As far as the plane itself, it is what you make it!!

Exactly that.

It can be the most perfect friend you have for smoothing wood or a wicked enemy of frustration, and it is all up to you.

Stanley provided the bones, and they are always good enough bones, even the poorest last ones they produced.

Good enough bone structure for any purpose at all.

How you tune it, and learn to get it to work, is entirely up to you.

yours Scott

Re: Stanley planes

#10

Bob's Stanley #3

Derek Cohen (in Perth, Australia)

>Hi Rick

I have a special fondness for the #3. I inherited my father-in-law's English-made #3 at a time when I was still solidly into powertools, and so it disappeared into the back of a shelf. About 15 years ago, having built a new house, I was deep into attaching doors and using a noisy, messy, powered Makita plane to trim the edges, suffocating under the usual earmuffs and eye protection needed for this tool. At some stage the blades on the Makita became too blunt to use and, being a weekend, the store that stocked replacements was closed. Then I recalled the little #3 at the back of the shelf. I'd never used one before, and only had a general idea what to do with it. Indeed, my FIL had passed on several years before the #3 came to live with me, and so had not been sharpened for a couple of decades.

I must have done something right, or he was smiling and doing it for me, but the moment I place the sole on the edge of the door and pushed forward, I got this "schhhhiiiiiiikkkkkk", and a long ribbon of wood appeared in the silence of the workshop, getting longer and longer as I pushed the plane forward. There is no way to forget that moment - it was the moment I turned away from powertools towards handtools. I was hooked!

The #3 is smaller in the hand than a #4. It has a narrower blade than a #4 (1 3/4" versus 2"). It is a more intimate plane that a #4. I just loved using this plane.

Now here's the embarrassing part. My confession is that I am a compulsive modifier, and have been ever since I could walk (so my parents tell me). I read about tuning planes. One of the tips was to file a chamfer inside the mouth to aid the flow of shavings. But I clearly misunderstood the directive ... and filed the outside of the sole .. effectively opening the mouth! I didn't recognise what I had done for a few years (as I only really used the plane on softwoods), until I became educated by Badger Pond. And then I felt awful! How could I have done this to Bob's plane?!

I never told anyone in the family. I very much doubt that they would have understood the issue anyway. Years went by with the #3 on the shelf again. Every now-and-then I searched eBay for another plane as a donor. A month ago I found one that was identical to Bob's. I was not interested in a better #3. I just wanted the same English casting, one in the same condition - but the #3 is not easy to find ... Onto the "new" base I placed Bob's frog, blade, knob and tote. I sharpened the England-made blade for the first time in many years and ran it over a piece of Karri Pine. It went "Schhhhhhiiiiikkkkk". I could swear that the jazz piece on the shop stereo became sweeter.

Regards from Perth

Derek

Re: Stanley planes

#11

Bob's your uncle.

James Watriss

>I read the same tip about chamfering the throat. I think it was in an article from David Charlesworth... so I did the same thing. Can't say for sure that it made as much of a difference as everything else, but I did it anyway.

Right around the same time, I was at North Bennet, with an Aussie by the name of Alastair Boell. Great guy, and absolutely hilarious... and I was always giving him a hard time about the whole 'Bob's your uncle,' thing, because he used it all the time. So I was half expecting it to come into play in your post somehow.

Good to know he's someone's pop-in-law, and not just everybody's uncle.

: )