We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>Derek's chronicles of the armorie generated more discussion than this site has had in many months or years perhaps. It kindled discussions of drawers, joints, design, etc. , all useful to those that build stuff....by what ever combination of hand and power tools.
If you are building something tell us about it, as you build it.
>I've been lurking, when and if I have the time to check in. I'm working on a number of things...
-Working a day job, and trying to stay afloat while I get ready to re-launch the woodworking business... The shop is still there, but I'm trying to get a better business plan together. I'm dabbling in chairs and 'side projects.' Side projects include everything from building a dresser into a packing crate, to a butcher block topped kitchen island.
Chairs will be for sale once I work the kinks out of the design. Point of departure was a Maloof inspired design, though, so there's not much to say in the hand tools forum, since almost all of the joinery is done using machines.
-After 2+ years, I'm still trying to write a book. It's taken me through a few different mind sets, and into a little bit of research. Reading old works from Gustaf Larssen has helped to bring focus to my thoughts... now I just need to put my thoughts into a coherent format.
-Planning a wedding with my fiancee, and coming up on our 4 year anniversary. I met her when I was still at North Bennet, and it's been quite a ride.
-Trying to find the time to go log-hunting at the lumber mills up in Maine. I want to get my hands on some nice bending wood before the sap starts to run again. Not that I know any better, but I'm told it's at least a bit easier bending winter-cut wood, since it's not full of sap.
It was nice to see discussions about something other than planes and workbenches. I get why those conversations are important, but at the same time, I start to feel sometimes like doing the work seems like moving mountains, what with all of the mental chatter about the soul of the tree, and the history of this 100 year old stanley plane, and the feeling of a well sharpened edge gliding... DAMMIT! ... make that tearing chunks of that soulful wood...
Sometimes it's just nice to feel like I'm moving and working, and let all of the accumulated romantic nonsense wash out of the corners of my head like so much dust.
>If I was hunting for bending wood some of the places I`d be looking would be;Talking to the folks at the Center for Furniture Craftsmanship (or Peter Korn directly)up in Rockport.Seems like there`s always one of the long term folks involved in bending wood there and they have a local sawyer they work with that is willing to work with others.
Contact some of the other craftsmen who`s work you admire and ask them where they get their stock.They`ve already waded thru the headache and have folks in place who understand what is really needed.Most I know are willing to share.
Talk to the log buyers for the yards.Folks like Kurt Olson in Solon or Mike Jackson with Western Hardwood buy veneer logs and will help sometimes if you want at least a trailer load.The problem here is that logs are a comodity to these folks and it will take some time(and maybe a few trips) to get to the point where you both are knowledgeable and happy with what you get every time.
If you`re looking for ash then talk to the basket makers especially the local Native American makers.The snow shoe makers would be a good contact too.
Some of the saw mill dealers(like Timberwolf) keep a contact list and help mill owners by putting buyers in touch with mill owners.You could always contact mill owners in the areas that you know have good trees of the type you need and if they have not worked with what you need then they usually know someone who has and will help make the connection.
If you still have no luck and have one of those unlimited phone plans you can PM me and I`ll put you in touch with some of the long winded folks I know locally who saw for the boatyards and local craftsmen.Barnaby and Tony can talk your ear off(as can I sometimes) but they`re good folks and know what they`re about.
Let me know if I can help shorten the distance.As we all know up here"Yah can`t get the-ah from he-ah".
>Thanks for the good advice, Bob. I'm sure I'll be in touch again when the air clears a little bit... I'm in the process of trying to get my truck fixed, after getting rear-ended by an E-350 conversion motor coach.
After I get that whole mess un-kinked, I'll be able to take a trip up your way.