Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Have I made an awful mistake?

Posts

Have I made an awful mistake?

#1

Have I made an awful mistake?

Bill Houghton

>Long, probably unnecessary introductionLast summer, in preparation for finally wiring the shop, I moved a bunch of stuff out, including much of my wood stash, which wound up under tarps. Since the shop wiring was a precursor to remodeling our back bathroom (everything in this house is complicated - the original wiring to the shop was overhead wires that I need to get out of the way so we could tear out the outside wall of the bath, which had some rot), and since the bath remodel is now in month five going on six due to some surprise extra work, I am only now getting the wood back into the shop.

It turns out that blue tarps are not proof against 22 inches of rain, so I wound up thinning the wood stash quite a bit - a lot of the maple got too moldy to keep (and, no, it's not big enough to let go to spalting so I could turn it, if I had a lathe), and some of the other wood too.

Finally getting to the pointI slathered the stuff that seems to have survived with a 50/50 mixture of laundry bleach and water and set it up on end to drain before stickering it on the shelves at the top of the shop. I know that chlorine doesn't last long in liquid state (since I need to add chlorine every second day to the hot tub), so I didn't bother to wash the wood after. Was that a mistake? Does the chlorine bind to the wood in some way and create a harmful chemical reaction if left unrinsed, or will it evaporate from the wood just as it does from the spa? I figure I'll need to plane the wood anyway when I use it, so assume any damaged cells on the surface will just get planed away.

Re: Have I made an awful mistake?

#2

Re: Have I made an awful mistake? *LINK*

wilbur

>You should be fine with the chlorine bleach if you haven't washed it off. Chlorine bleach is used in (you guessed it) wood bleaching applications, and can be neutralized by rinsing with lots of water, or a water/baking soda solution. But if you leave it there, the chlorine should dissipate with time. Very low concentrations of chlorine gas is what you smell when you use bleach, and apparently the mold killing power of bleach gets cut in half over 90 days even if it sits unused in the bottle due to outgassing.

One good reason, however, to neutralize the chlorine bleach now is that chlorine bleach will destroy the lignin in wood, which will change the appearance of the board. You could plane away that layer, but it you want to limit how much wood you'll lose from all this, you might want to neutralize the bleach now.


Bleaching wood

Re: Have I made an awful mistake?

#3

Dealing with mold and mildew

Bob Hackett

>Bleach will usually be the first thing someone reaches for and while it will kill the surface mold it will not keep it from coming back.

My wife and I looked into what to use on wood in order to combat the mold and mildew problems we saw in waterfront vacation homes that are closed up for all but the summer season.Some of there houses used to grow fur in the fireplace!What we found was that professional clean up crews(we were only semi-pro,Pro carpentry and painting were where she wanted to be)used Simple Green to both clean surfaces and kill mold.No rinsing needed.After 1 or 2 applications(depending on surface porosity) the mold stopped growing as long as the house was properly ventilated during the off season.

One quick way to knock back mold/mildew on things like spalted turnings is to spray with lemon juice.I know SG is supposed to be non toxic but lemon juice just seems friendlier toward the maker.

MB

Re: Have I made an awful mistake?

#4

no, just a bit of unnecessary effort

Bill Tindall

>1. Mold will stop growing when the wood surface gets dry so the bleach treatment was unnecessary.

2. Bleach is a mixture of lye(sodium hydroxide) and chlorine. When the chlorine goes away the lye is left. But, this lye will react with carbon dioxide to make washing soda (sodium carbonate) which is not going to be harmful to handle or work. It may react with some finishes so you may need to plane it off.