Why these rabbet planes? *LINK*
Bill Houghton
>Stanley produced two series of planes - numbers starting 180 and 190 - that are simple rabbet planes, roughly equivalent to a No. 78 plane with the iron in its standard position, but with no fence. They started making these the year after they started building the No. 78, and kept building the 190xx series up through 1962.
Other makers did, too (my current tool porn favorites being the older Sargent planes, which are way way more graceful than the Stanleys and just littered with flowerdy embellishments on the castings).
They seem to have been popular - I counted 17 Stanley No. 190/191/192 planes on deBay today plus one No. 181 (not counting parts and one sad little 182 with its nose broken off), vs. 18 No. 78s.
Does anyone know why? Since the No. 78 can do pretty well everything the 180/190 series planes can do, AND it has an adjuster AND a bullnose position for the iron (granted, not useful often, but sure is useful sometimes) AND a fence, why would anyone buy the simpler planes? To actually cut an accurately placed rabbet from scratch with one of the simpler planes, it seems you would need a batten to work against, which would then need to be removed lest it get in the way of the depth stop, slowing the work. Was it purely a cost issue - impoverished carpenters or apprentices bought them and worked around the limitations, pining for the day that they could own a No. 78 - or were there production environments in which the simpler plane was absolutely all that was needed? Or were rabbets laid out by measuring over from the face edge, rather than planing the opposite edge true and gauging from that (second) edge, so that the fence was less useful than we now think it is?
From Patrick Leach's "Blood and Gore"




