Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Transitional planes...

Posts

Transitional planes...

#1

Transitional planes...

James Watriss

>No content, just wanted to bait the hook and see who came up to nibble...

: )

Happy Sunday.

Re: Transitional planes...

#2

Re: Transitional planes...

Neal in San Jose

>Well, you know the old saying: I left a transitional plane on the seat of my car, and when I came back, I had two!

I think everybody needs two. They are great for holding down drawings that try to roll up on you. Since I never use mine, I always know where they are, and I won't need 'em somewhere during the project.

Re: Transitional planes...

#3

Chomp, chomp

Bill Houghton

>I own one, a Stanley 36, picked up at a rummage* sale at the historical society some years back. I've played with it once or twice but haven't had much occasion to use it (waiting for that magic moment when the big work on the house is done and I have shop time - I'm picturing tuning it up as a final smoother).

I've never quite understood why they're so disrespected. They are, after all, wooden-soled, which the woodie folks think is a good thing. I suspect it's because they're neither metal nor wood, and thus have something to offend everyone. Granted, mine has a fairly large mouth, but it would be as easy to put a patch in its sole as on any full woodie.

The 36 is sure pretty. A couple of years ago, we went to a local charity art auction, and someone had done a photo-realistic painting of a 36, shining on a dark background. The winning bidder paid about ten times what I paid for the real thing.

*wandering off topic: not everyone knows that "rummage" is properly pronounced "room-age," with a slight emphasis on the second syllable.

Re: Transitional planes...

#4

Re: Transitional planes...

Jerry Nicholson

>I have several, ranging from fair condition to poor condition. Unless you set the frog way back or put shims between the back of the body and the iron, the iron will very poorly supported compared to a metal plane or a real woody. I haven't had much luck trying to use them but I haven't put a lot of effort into it either. Someday if I catch up on my round tuits, I am going to tune up my Gage plane and see how well it works. Its iron appears to have better support then the Stanley and Sargent transitionals.

Jerry

Re: Transitional planes...

#5

Specialty use for mine.

Chuck Nickerson

>I do some stave barrel work. I've shaped the soles of transitionals to match various radii, and use them to smooth the inside of the barrel/drum.

Re: Transitional planes...

#6

Re: Transitional planes...

David Miller from Iowa

>I like them.

Re: Transitional planes...

#7

Re: Transitional planes...

James Watriss

>For those of you who really feel the urge to drool into your keyboards, the much-esteemed Mr. Holtey has been working on some...

http://www.holteyplanes.com/blog/

Re: Transitional planes...

#8

Thanks a bunch

Neal in San Jose

>Now I'm gonna be late for work! Carl's are somewhat prettier than my Stanley and my Sargent.

Re: Transitional planes...

#9

Re: Transitional planes...

DAVID J CHURNEGA

>Making these planes work is a snap.

It is embarassing to me to see how well they work compared to my expensive metal planes. Considerably lighter too which aids in a long session of flattening a tabletop.

Re: Transitional planes...

#11

scott grandstaff

Re: Care to show us the way?

scott grandstaff

>I have a transitional that I like.

Actually I like all I have.

But I did this one years ago, and it has worked out a favorite little plerp.

I reach for it often.

http://www.snowcrest.net/kitty/sgrandstaff/do.htm

I think its Mozilla. I can't seen any link attach feature, and don't get the "add extra images" link address either, on my browser.

yours Scott

Re: Transitional planes...

#12

It's not Mozilla, it's your profile, or lack of

Pam Niedermayer - Austin, TX

Re: Transitional planes...

#13

Profiles

Bill Houghton

>Scott,

You do show a profile in the system. What you should see when you reply or start a new thread is the screen below, except without my unreadably scrawly annotations on the functions of the different boxes.

If you're having trouble, let one of the moderators know - we might be able to help.

Bill


img

Re: Transitional planes...

#14

scott grandstaff

Re: Profiles

scott grandstaff

>Thanks Bill

Did you notice my profile was, like, 16 seconds old?? heehee

After Pan told me about it, I investigated around and made one.

I can see the full console now.

Still don't know what to write in the profile description?

haven't found anyone else's profiles to compare to yet?

But I'm writing just like a big boy now. hehehe

I'm stuffing in an extra picture just for the halibut.

The extremes of spokeshaves?



yours Scott

Re: Transitional planes...

#15

Re: Care to show us the way?

DAVID J CHURNEGA

>Sorry, I took so long to reply. I cannot give a better explanation than can be found on the web about sharpening, frog adjustment and the sole mouth. Almost anything said about iron planes applies.

The left one is a Stanley #28 (No. 6 Size) with a V-Logo and the right is a Lakeside mechanism planted in a beech body (No. 7 Size). The only abuse shown to either is the obvious use of a hammer to adjust blade on the Stanley.

Wanted to post another image of the soles but site apparently does not allow. Soles show tight mouths and smooth soles throught their length.


img