We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I saw this in the movie -"Mistress of Spices". I like the box and I am preparing to make one like this but I don't know what that drawer lock mechanism is. That horseshoe shaped cutout must recieve some drop down as a lock...I think. Does anyone know this lock? Any patent reference (name) so I can see the details?
Bill, Dan, and I are working to get you an answer on the Edit function. There is to be one, but I'm not sure if Ellis has it up yet (my screen only offers me a 'Delete' option--I'm checking with Bill Houghton and Dan Donaldson as to what they see).
But first, let me ask you this: When you go to post, are you looking at a screen like the one in the link--this is the 'bells and whistles' screen that registered members should be seeing.
If you are, then we are working on why there is no Edit function for you. If you are seeing a plainer screen that the one linked, then see Ellis' message just below this one entitled "FYI--WoodCentral Profiles", on how to get registered.
Thank you for your patience. Ellis has been working day and night for at least two weeks trying to ready everything for this 'big bang' changeover. He debugged as best he could, but there are things he couldn't test without 'going live'. Meantime, he just gave out, and had to get away 'til Sunday evening. He'll be back with us Monday.
>I looked and it appears that he has no profile. There will not be an edit function if he has not got one. Most everyone will need to create a new profile if they have not done one in the last few days. Attached is a screenshot of what I get on the hand tool board.
>Wow! Everything is off. I am listed as having a profile but under another user name. I'm listed as having only 19 posts but I've been around since the "pond" days. I don't want to register again and lose my old identity. Hope I can get some help with this (probably why I don't see the edit option).
BTW ....I still need help with the drawer lock in the photo.
>If you can access the profile, you should be able to edit it to be what you want. If not, get back with exactly what you are trying to do and will see if can help.
First off, remember that we're struggling too. This is new to all of us.
What I've learned so far is that, in spite of Ellis' good efforts, our old profiles may be hidden in the system - WC or our own computers or both. I seem to be able to bring up both my newly created profile and my old one. The new profile will bring me all the toys, including edit function; the old one won't.
When Ellis gets back from a well-deserved break, perhaps he and the developer can scrub the old profiles out properly, and resolve this issue.
I just logged in under my new profile and was able to post, edit, and then delete a test message.
If you haven't created a new profile yet, give it a shot and see if it works. Two recommendations:
1. For the moment, don't choose to save your password when you post or edit messages. Until these ghost profiles are resolved, I think saving a password is likely to create problems.
2. In addition to cleaning out the cookies on your browser, see if you have the choice to delete saved passwords; if so, delete them. That was what allowed me to enter the system through my new profile.
As the computer tech in my old job used to say (I'll try to convey his tone of voice with a little font editing, something I haven't tried until now), "Computers make our lives easier!" He told me, when I was back doing some consulting there, that he'd stopped saying it, because very few people understood it as I had, as gallows humor when the danged black box wasn't cooperating.
I've recently been hunting around for locks, so am reasonably familiar with the typical styles.
The only thing I have seen that looks remotely feasible would be a round half mortise lock. See link.
But there are two problems with this suggestion. The first is that a half mortise lock is normally let in from the inside, and a small hole is drilled to provide key access from the outside. So looking from the outside, all you see is a key escutcheon. But if such a lock were fit into the half-moon in your photo, one would see the entire body of the lock--so it wouldn't look right.
The other problem is that mortise and half mortise locks would normally be placed at the front of the drawer or chest, not around to the side.
So the suggestion is a long shot, to say the least, but I bring it up just to get off dead center.
>The size and placement of the half round cut out and the fact that the key appears to be inserted in the front says to me that either the key unlocks the top which raises and then a second piece is dropped from the top to lock the drawer or that the cut out was used for something else.
If there is only one lock(on the front) and it does in fact engage and lock the drawer from the side them it would require a number of levers and pivots within the top section.
>I think it's closer to what Bob stated. My dental cabinet locks witha drop down when the middle upper drawer is shut. You can feel the resistance of the lock as you push the drawer in but this system is different.
If not then I`d just take the profile and outside details into account and use any lock system that made sense to you.
The top section looks like a compartment rather than a drawer so if you built it that way then things would become easier by several orders of magnitude.The lock works to lock the top and a simple spring loaded drop bolt pushed down by the top would pin the drawer.No need to carve out a large section of the drawer side.
>"The lock works to lock the top and a simple spring loaded drop bolt pushed down by the top would pin the drawer"
I think the box in the movie wasn't working properly. It should have been able to have an open drawer only with the lid of the upper compartment open...I think.
I have never made this kind of lock (in quotes). Do you have a link to a package, kit or tutorial?
>The lock would be morticed into the front just like what Wiley suggested.They make small square ones also.
I have made drop pins for myself and others out of brass and bronze but don`t have a link to anything.I just copied what I had seen elsewhere.I used a spring from a ball point pen on most of them.
A more simple arrangement might be a simple wood batten slid thru a hole in the corner of the back compartment that blocks movement of the drawer by engaging the back of the drawer.To open the drawer you lift the lid,pull the batten and the drawer is free.
>Assuming the cutout actually represented a catch for the lock mechanism rather than, as on some of my grandfather's shop furniture, an artifact of the drawer side's previous incarnation as something else that had a notch like that...
It occurs to me that, before power tools, it would have been a not insignificant amount of work to make a cutout that shape. Could there be a pivoting catch, with the pivot point just above the drawer, rotating down 90 degrees as the lid came down or the lock was engaged? It would be rather gizmotic - a simple spring-loaded pin, one of the traditional solutions, is so much simpler - but the history of furniture hardware teaches us that gizmotic solutions aren't uncommon during some periods.
Have you considered contacting the production company to ask if the box is still in hand and, if so, how the lock mechanism works? It would, granted, kinda kill the mystery.
I'm looking forward to how you solve this conundrum.