Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Wagon vises are Normal

Posts

Wagon vises are Normal

#1

Wagon vises are Normal

Bill Houghton, Sebastopol, CA

>I picked up the first New Yankee Workshop book at the library book sale Wednesday (to offer on the benefits auction, when I get a minute), and was surprised to discover that Nahm featured a workbench with a "wagon vise," as Chris Schwarz describes it, 20 years ago (or more - the copyright on the book is 1989, but presumably it's based on an episode at some earlier date of the New Yankee Workshop Filled With More Power Tools Than You Find In Most Hardware Stores). I knew that Woodsmith had featured a bench with a wagon-type vise a long time ago, but to find one on something this mainstream was kind of surprising.

The bench, in general, is not a good design for hand tool work - a perimeter frame supporting a sandwich of 3/4" plywood and 1/4" masonite, way too flimsy for good chiseling, and there's no face vise. But it is interesting that Nahm anticipated Chris by so many years.

Image below from the book is based on my understanding of fair use.


img

Re: Wagon vises are Normal

#2

Re: Wagon vises are Normal *LINK*

Alan Schwabacher

>You are right on time. Starting today, and for a week, you can watch that episode of NYW on the web.


New Yankee video online

Re: Wagon vises are Normal

#3

Quick question

Bob Hackett

>How many of us wear a toolbelt inside the shop?

MB

Re: Wagon vises are Normal

#4

Maybe not a belt...

Scott in Montana

>but I still wear an apron. Gotta have a place for my 6" rule, small square, and a pencil or two. Maybe I'm just old fashion? :O)

Scott in Montana

Re: Wagon vises are Normal

#5

Germany, ca. 1500

Wiley Horne--So. Calif.

>Indeed. If one looks in Scott Landis' 'The Workbench Book', five or ten pages in, there is a drawing of a bench with a twin-screw front vise, and what Landis calls an 'enclosed tail vise', aka 'wagon vise' in new money. The drawing is attributed to a Nuremberg engineer named Loffelholz, and dated 1505.

Trying to find new handtool stuff under the sun is a tough job.

Wiley

Re: Wagon vises are Normal

#6

Apron sure...

Bob Hackett

>But I just picture a tool belt hanging up on too many things in the shop.

Tool belts just say nails to me,lots of nails.

Maybe that`s because nails,afew drywall screws and construction tools is what I carried when I wore mine.

Come to think of it,I`ve seen Norm use both nails and drywall screws in furniture.

Never mind.

MB-Wondering if Norm has a big hook on his hip to hold the nail gun or cordless drill like I did.

Re: Wagon vises are Normal

#7

Re: Quick question

Bill Houghton, Sebastopol, CA

>If I wore a belt in my shoplet, I'd get stuck and be unable to move.

Bill, two belts: carpentry and electrical.

Re: Wagon vises are Normal

#8

Re: Wagon vises are Normal

Victor Parisian

>A much younger Norm. His tennies look to be older than he is.

Victor - enjoying some cool weather in Houston.

Re: Wagon vises are Normal

#9

Ol Norm looks young there !

steve mackay

>

Re: Wagon vises are Normal

#10

It always important to dress for the part...

Marv

>

Re: Wagon vises are Normal

#11

Re: Wagon vises are Normal

Jim in N.VA

>Years ago, I built that bench. It's actually quite sturdy and (because of the beam that holds the bench dogs) you can chisel on it, especially over the legs. I did add a Record vise to the front. As built, it is far too light for planing but I solved that problem by putting cement block weights on the shelf. The "wagon" vise worked great and was a wonderful feature. One thing I learned from that bench is that I do not like tool wells--although I know this is a personal preference thing. I eventually sold the bench and my current one is much heavier. Although I think there are better "first bench" designs out there, Norm's design served me well for a number of years.


img

Re: Wagon vises are Normal

#12

Mark Meier (Ann Arbor, MI)

Re: Wagon vises are Normal

Mark Meier (Ann Arbor, MI)

>Same experience here. I built that bench years ago and used it for several years. It was the first WW project I ever did on my own, completed in 1998. I sold it to my neighbor (for $90 -- less than what the vises are worth) when I had a better bench.

In the beginning I did everything with power tools. Note the whopper belt sander beneath the bench :)

Mark


img

Re: Wagon vises are Normal

#13

Re: Quick question

Greg B�tit, Crown Point, NY

>Not inside the shop. Only when I'm doing 'carpentry'. The apron, on the other hand, is there with a pencil, 6" rule and calipers. I love the calipers, they're marked in inches and fractions, not decimals like the dial caliper I used at work.

Re: Wagon vises are Normal

#14

Re: I made this bench...

David Hay @ Denver

>...about 10 years ago, and I'm still using it. I'd agree with the others who have built this bench: chiseling works just fine. I tend to have things clamped in the wagon vise, which tends to put it right over one of the legs. It is a bit lightweight to do much heavy planing on, though it does work well enough. I also put a face vice on it, which greatly increases the bench versatility.

David