Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Help ID Unusual Level

Posts

Help ID Unusual Level

#1

Help ID Unusual Level

David Miller from Iowa

>Picked this up today. Split down the middle with a very fine adjustment screw on one end that expands. The other end isn't hinged - just a metal plate that flexes. Like a grading level, but the graduations and length of travel are for too fine.

No makers mark. ideas on maker and use? Thanks. David


img

Re: Help ID Unusual Level

#2

Re: Help ID Unusual Level

Paul M.

>No ideas on the maker. As to the usage, I'm laying out concrete forms in my yard and want to have a small degree of angle for drainage. This would allow a simple bubble to have a known rise/run ratio by tweaking the gap between the two boards. Modern levels have calibrated bubbles with multiple lines to accomplish the same rise/run calculation.

Just a guess, but seems plausible!

Re: Help ID Unusual Level

#3

In shipbuilding...

Bob Hackett

>That would be known as a declivity level.

They were used to level things on ships built on inclined ways and set from a known surveyed benchmark on the boat.

MB