Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Veritas Detail Saw

Posts

Veritas Detail Saw

#1

Jack Guzman from Maine

Veritas Detail Saw

Jack Guzman from Maine

>I do alot of small detail work. I mosty build clock cases.My latest project is a half round window sash. A client has an old wooden one on one gable end of a building and wants a similar one for the other end.After searching in vain for anything close in old house parts I decided to build one. How hard can it be?

In the process of fitting mullions I find myself in a familiar position. I need a detail saw. I bought a tiny "razor saw" but it's way too small for this application.My veneer saw is too short for good registration.My LN dovetail saw is just a bit big and a little rough.

After looking at the ads,I decided that Lee Valley's new dovetail saw with 20 tpi looked promising so I ordered it.

I started using it today.It's perfect!I'm sure this saw is great for dovetails in narrow work(what it's designed for)but it is ideal for detail work.The handle makes the saw feel like a part of my hand.Delicate enough to avoid tearing of fibers but agressive enough to be steerable.I did some fine trimming with the tip of the saw using only the last four or five teeth. Works great.I love this saw.

I made a spot on the wall behind my bench where it will be within hands reach.

Rob you could call this saw the Veritas dovetail/detail saw.---Jack