Shopping for a new shoot board plane? *LINK*
Scott Burr in Ben Lomond CA
>Seem like good ol Tom and crew are working on one. Pricey but we'll see if it's worth it.
LN #51
Knowledge You Can Build On — Est. 1998
Shopping for a new shoot board plane? *LINK*
Scott Burr in Ben Lomond CA
>Seem like good ol Tom and crew are working on one. Pricey but we'll see if it's worth it.
LN #51
Re: Shopping for a new shoot board plane?
Scott in Montana
>But I promissed her that my #9 was all I would need for shooting edges. Guess I'll have to stick with my sloped shooting board until she forgets. Like that will ever happen. :O(
Happy Holidays!
Scott in Montana
Re: Shopping for a new shoot board plane?
Victor Parisian
>other than the skewed blade, what will I gain from this that the #9 wont deliver? Or how about my #608? It has the mass and with a sharp blade takes a nice shaving.
Victor
Good question Victor...
Scott Burr in Ben Lomond CA
>I don't know myself besides the skewed, I don't know if there's a significant weight difference or bedding angle between the two.
Re: Shopping for a new shoot board plane?
Dominic in Buck's County PA
>Scott,
You know, I looked at that and thought, "Man, that is cool! But how could I justify it when I have a LN No9 already?".
I would have to assume that due to the cost this is up there with the Bridge City Tool's Joint Make Pro. Super cool, but meant only for those with a bit more disposable income than most! :>)
Personally, if I was going to get a new dedicated shoot board plane I'd be looking at Ron Brese's infill miter plane! I tried that out first hand (during WIA) on a wooden shoot board and was blown away at how well it worked!