Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rare Exotic & Domestic Hardwoods, Milled In-House in Oregon. Browse Unique Stock.

knife pix

Posts

knife pix

#1

scott grandstaff

knife pix

scott grandstaff

>I know, no pix, didnt happen

So here we go

The retirees and my current carry



The top is the old Barlow, I went with local blacktail antler the last time. Notice I added a bottom bolster along the way.

My current carry is the Bulldog on the left. Bone handles and carbon steel. I keep 2 guitar picks in it for emergencies.

The bottom is my toothpick, which I don't really consider a knife. Its more like a spare finger to me. It used to have deeply jigged bone which is now almost smooth, again!!


Above is one drawer. Small frame knives pretty much.

These below are all homemade except the Frosts blade in lower left.

That was a regular Woodcraft supply blade back when they were abotu 6 bucks. How long ago was that?? :)


yours Scott

Re: knife pix

#2

Re: knife pix

Bill Tindall, E.TN

>3rd down on the right will take the hide off a deer (or other critter) nicely. The only time I have ever seen so many knives in one place is at a flea market.

Re: knife pix

#3

Re: knife pix

Andy Lincoln,in Dearborn MI

>Scott,

Good looking knives there. Funny that knives have been discussed a couple times here in the past couple days. Thanks to my new friend and fellow Centrailian, Ralph Drouare I now have a couple knife blanks to try my hand at making my own �custom� knives.

A couple of my co-workers are also interested in making some knives and I was wondering does anybody have a favorite source for knife blanks? I found some on Ebay but the prices are all over the map and I have no idea what is good and what would just be junk. Is it better to start with some lesser quality blades just to get through the learning curve making handles? Buy better steel blanks and remove/replace wood if project doesn�t work out?

Any good on-line tutorials worth reading? This looks like a project that could have reasonable results in a reasonable time and maybe I can keep focused through a short project.

Thanks,

Andy


img

Re: knife pix

#5

I've had good survice here.  *LINK*

Phil Joines Krum,Tx

>


Texas Knifemakers Supply

Re: knife pix

#6

Here's a fabulous thread on a knife-making forum *LINK*

Bruce, a MN Galoot

>that provides intimate detail and pics of absolutely every step of making a custom folder. Did I mention it was detailed? And you don't need to be a member to see the pics.

I'm not sure if it's for a beginner, but you'll get a darn good idea of how it's done.


knifedogs