completed plane *BIGGER
Catharine Kennedy
>This Lie-Neilsen plane cut like butter- bet it works well on wood, too!
Knowledge You Can Build On — Est. 1998
completed plane *BIGGER
Catharine Kennedy
>This Lie-Neilsen plane cut like butter- bet it works well on wood, too!
Re: completed plane
Thomas Skaggs, Foothills of Mount Level
>Beautiful! Be sure to send a picture to Tom L-N. I'm sure he would enjoy seeing it.
T.
Re: completed plane
scott grandstaff
>Catharine
This is gorgeous work!
But throw us up a little bigger pic??
I am trying desperately to dive in and hitting my head on the perimeter!
yours Scott
Re: completed plane - SUPERB!!
Jim DeLaney, Austintown, Ohio
>
Re: completed plane
Victor Parisian
>Tool Porn!!! Post a bigger pic please. From what I see it looks mighty fine.
I'm considering sending you my 4-1/2 bronze LN for some finish treatment. Or would that destroy the "collector's value". ;>).
Regards,
Victor - in Houston
Re: completed plane *BIGGER
charlie belden
>What, no "wriggling" with a line graver in the field around the monogram?
Stabbed yourself with a lozenge graver - yet?
I believe the body of the plane is cast bronze. Did it cut like rolled sheet or were there inconsistency in the metal?
Re: completed plane *BIGGER
Catharine Kennedy
>no- this stuff cut beautifully!- however the brace I did after this was just awful as far as consistency of material!!!!!and having done much stabbing of my hands- leave that for doing with screwdrivers!
Re: completed plane *BIGGER
Marv
>Catherine,
Beautiful!
Didja do both sides?
Marv
Re: completed plane *BIGGER
Catharine Kennedy
>of course! AND the adjusting screws AND the lever cap!
Re: completed plane *BIGGER
Tony Z.
>Simply beautiful!!!!
This is gorgeous
BarbS
>Katherine, you do a wonderful job engraving! Very Very Nice.
Awesome!
Joanne in Pt. Pleasant, PA
>My hand is barely steady enough to write my own name with an ink pen! I have no idea how you do this!
Thanks for the larger image.
Victor Parisian
>Beautiful.
Victor - freezing this morning in Houston
Silly Me!
Marv
>It would be silly to not carve both sides, but the reason I asked was because when wheat carving a handsaw handle, only one side is done, in most all cases. I suppose the saw makers were trying to keep their costs down. But even on their high end saws, they only carved the left side.
I don't know about planes, but when I carve a saw handle, it always cuts much better....*grin*
Marv
Re: Silly Me!
Catharine Kennedy
>Absolutely cuts better! and didn't realise only the left (inside) of the saw handle was carved!
Re: Silly Me!
Tony Z.
>Bou can I attest to this, after receiving a Wenzloff re-make of a Disston #16, with some "special" wheat carving!
increase the value
Jack Guzman from Maine
>On the contrary,I think such a treament would greatly increase the value of your plane.IMHO----Jack