Ron Hock's book *LINK*
Pam Niedermayer, Austin, TX
>Looks like Ron Hock has written a new book on sharpening for woodworkers, not yet published.
Knowledge You Can Build On — Est. 1998
Ron Hock's book *LINK*
Pam Niedermayer, Austin, TX
>Looks like Ron Hock has written a new book on sharpening for woodworkers, not yet published.
Re: Ron Hock's book
Neal in San Jose
>It is supposed to start shipping in January. If you pre-order it directly from Ron (hocktools.com) before the end of the year, he'll throw in $10 in "blade bucks", which makes it almost exactly the same price as Amazon, altho shipping appears to be free from Amazon.
His website is worth a visit, and if you ever get a chance to see him in person, do it. Very knowledgable about everything related to plane irons and willing to share, even if it means you could set up competing with him making blades in the kitchen out of '68 Chevies.
Re: Ron Hock's book
Pam Niedermayer, Austin, TX
>Yeah, one of the things that made the book more interesting is that in a brief bio it says "Ron Hock is the owner of Hock Tools, a 25-year old cottage industry that makes acknowledged superior blades for planes and other woodworking tools. Since making his fi rst blades, he has spent 25 years learning about tool steel metallurgy, cutting edge geometry, hand woodworking tools and sharpening. His interest and expertise regarding sharp edges comes from a blade-maker's perspective; he has given countless lectures about steel, tools, and heat treatment."
Now there are no promises that these issues will be addressed, but I sure hope so.
Thanks for the tip on ordering. That $10 in blade credit would be a great benefit if one uses western blades.
Pam
Re: Ron Hock's book
Cecil Nickerson
>Actually Neal, the quarter panels from a 1970 F-150 are superior.
Re: Ron Hock's book
scott grandstaff
>Don't worry Pam!
You can't toss a blanket over him and get him him to stop with steel and its properties once he gets going.
Its Rev Ron and he's going to hold forth!! heehehe
Got to love him!
The book will be a very good read. Wait n see.
yours Scott
Anyone tried postwar Studebaker trucks?
Bill Houghton, Sebastopol, CA
>They used very thick sheet metal, and I'm told that autobody workers hated to see one come into the shop, because they were difficult to get back in shape.
Cool, sounds like you've already read it. :)
Pam Niedermayer, Austin, TX
>
Corrosion section
David Cockey
>My wife helped with the corrosion section. This will be the first book or article on sharpening that mentions corrosion that I'm aware of.
Sounding better and better.
Pam Niedermayer, Austin, TX
>