Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

Talesin Lamp wiring

Posts

Talesin Lamp wiring

#1

Talesin Lamp wiring

ThomD

>A few people here have provided good electrical info in the past. I have a design in mind that while not the same as a Taliesin lamp

http://www.amazon.com/Yamagiwa-S2310-Taliesin-light-Table/dp/B002O26RQ8/ref=sr_1_6?ie=UTF8&s=hi&qid=1258061925&sr=8-6

Will be influenced by it, and could be wired in a similar manner. Does anyone have any ideas of options here? For me it would just be mood lighting, and I would not choose to make the individual lights turn on and off separately.

I was thinking of adapting an LED Xmas light string if it is possible to cut off the unnecessary lights. I like LEDs for this kind of thing because of the low energy use, and therefore heat output. A more professional wiring of LED components would be preferable, if anyone can suggest a circuit

Re: Talesin Lamp wiring

#2

Re: Talesin Lamp wiring

D. Tardiff

>Having used LED lights for gingerbread-house lighting systems, there are a few tricks. Like 120v lights, they're often wired in combinations of parallel and series to get the voltages to match up to the supply (I've used battery-pack ones as well, intended for door wreaths). Examine the original string carefully to reverse engineer the wiring diagram before making any cuts. Note that LEDs will usually only work at a specific voltage and current, so figure out how they're doing that (from 120v AC) first.

Re: Talesin Lamp wiring

#3

Re: Talesin Lamp wiring

Thomd

>Thanks. I will check out dool's house lights also, they might be a possible fit if they were strong enough.