Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

A question for the historians

Posts

A question for the historians

#1

A question for the historians

Phil Joines Krum,Tx

>I�m working on the design for a treadle lathe to use for demos and such. One question was weather to make the spindles the way the originals were or to modernize them with Morse taper sockets and threads for chucks and such. I�m going with the old way but it got me to wondering if the old tool catalogs or other records ever had listings for mass produced metal parts for lathes. Any village blacksmith should have been able to make them and there may not have been enough demand to mass produce them.

Re: A question for the historians

#2

Re: A question for the historians

Joel

>what year?

lathes have been basically commercial items for a couple hundred years. before that your standard bodger's lathe had no complicated parts that had to be bought in.

So while it was most certainly possible to buy a complete ready to use ornamental turning lathe, or it's parts, or a simpler lathe two hundred years ago it was also pretty common for a bodger to make his lathe from essentilly scratch a hundred years ago.

Re: A question for the historians

#3

1800?

Phil Joines Krum,Tx

>I think treadle lathes for wood turning started around 1800. They were used be jewelers well before that.

Re: A question for the historians

#4

Re: 1800?

Joel

>There is a treadle Lathe in Moxon (plate 17) which is from the mid-seventeenth century. by the 18th century ornamental turning lathes were quite fancy.

Re: A question for the historians

#5

Morse Tapers

Patrick Gibbons, Katy, TX

>These were developed in the 1860's. Originally applied to drill shanks and quickly adapted for other uses. The concept of machine tapers is much older than Morse tapers, which is just one example.

Re: A question for the historians

#6

Stephen Shepherd

Re: A question for the historians

Stephen Shepherd

>You can make a lathe with external threaded mandrel and square taper (not round or Morse) center. See L'art de Tournier by Charles Plummier (French 1792).

Stephen

Re: A question for the historians

#7

Re: The Real Answer

ThomD

>If you want a practical lathe, but one that is foot powered, I would go the tapers and threads root. It is much more versatile, and you can pick up a quill on ebay for a few bucks, then sell it back to ebay customers if you change your mind:

http://cgi.ebay.com/Spindle-for-Southbend-Lathe_W0QQitemZ250527515479QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item3a549a8357

In the old days people wanted the biggest spindle MT hole possible, but a number of the super lathes these days have standardized around an MT2 taper, as in a lot of small metal lathes.

If you do recycle a spindle, check with Oneway whether they have adapters for it first.

If you want to make your own spindle, then you probably already know what to do. One route though is to buy some spindle tubing, bore the taper, and then ream it with an MT reamer from the likes of:

http://www.victornet.com/subdepartments/Morse-Taper-Reamers/2549.html

Those reamers are about the same price as plastic ones I bought to keep my lathes clean!

I would also probably go the Richard Star lathe route, as in his book, and more recently a woodworking mag had a pattern for it. Also was in the FWW book on making your own tools. But I haven't made one, so that is just a guess.

Re: A question for the historians

#8

Re: A question for the historians

Adam Cherubini

>I'm doing a WWII reenactment next week. Do you think it would be okay if I carried my colt arms M-16? It's sorta like an M-1 garand, isn't it? The people watching probably wouldn't know the difference anyway, would they?

Why bother go to the trouble of make a treadle lathe, then putting a modern head stock in it? Seriously, if the demo is turning, why bother with the treadle. Bring a Jet midi. It's easy to carry, and folks can get closer to it.

If you are going to do demos that are historic in nature, go full tilt. I suspect you'll find the construction and use of a period head and tail stock fascinating.

Adam