Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

More Flat Reading Folding Rules

Posts

More Flat Reading Folding Rules

#1

More Flat Reading Folding Rules

Jay Samuels

>After last week's thread, I went home and checked my box of folding rules. Since I am seldom able to pass up a folding rule (or a brace for that matter) at a garage sale, I have a pretty good selection. I have the Lufkin engineer's rule, a Lufkin 966F and an equivalent Stanley with no number. The engineer's rule has 10ths on one side and not 8ths, plus mine is marked in feet plus inches (e.g. 2 feet 10 inches, not 34 inches), making it difficult to use if you are used to thinking in aggregate inches. The others have conventional markings, but read upright from left to right with the stack up when partially folded.

I am in the process of putting down oak flooring in the bedroom, and using the flat reading rule the measure for the last course in the row, and then to measure the board to cut, is SO much easier than using a conventional outside reading rule. And much easier than using a tape measure.