Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Major issue of our time *LINK*

Posts

Major issue of our time *LINK*

#1

Major issue of our time *LINK*

Wiley Horne--So. Calif.

>Some tools require (as in, you gotta have it and nothing else will do), I say require, an Allen key to work. I'm reminded as I just received a useful 'double bladed inlay cutter' from Rob Millard. See link to Mr. Millard's Federal Period furniture site. This knife comes with its own Allen wrench to lock the blades into place.

I have a lot of stuff that has these dedicated keys. Drill stop collars, adjust on twin screw vise, countersinks, etc etc.

Multiple Choice Question: What do you folks do to keep track of these Allen wrenches?

A. Just remember where I put it ..........

B. Every tool has its own box where everything goes....

C. I don't--I have several full sets of Allen wrenches, in various odd locations.

I sort through them trial and error to find the right one on demand.....

D. Throw 'em in all the bottom of a known drawer, and try every one until I (hopefully)

find the right one......

E. Big rubber band around tool, with Allen wrench tangled in it......

F. My sawzall has one permanently attached to the power cord....

G. ________________________________________________________ (DIY)

I use all of these, except for B. What do you folks do?

Wiley.....curious


Rob Millard's 'double bladed inlay cutter'

Re: Major issue of our time *LINK*

#2

Turn a nice wood handle

Bob Hackett

>And epoxy it to the Allen wrench.Makes it easy to tell the correct wrench.

For the tools I haven`t got around to yet there is always the set of T handled Allen wrenches or the folding set that looks like a Swiss Army knife for Allen bolts.If I can`t find those there`s the Bondus Balldrivers,or the Snap-on hex key sockets,or the hex driver tips that came with the ratcheting ergonomic screwdriver kit.

Or I just give up and hit the computer for awhile.

Mainely,Bob-Who`s beginning to realize he may like Allen bolts alittle too much.

Re: Major issue of our time *LINK*

#3

Re: Major issue of our time

Marv

>Wiley,

For smaller allen wrenches, I have a set that is a fold out kind of deal, similar to a pocket knife. If I lose one of those, I lose them all. For larger ones, I have a set that is in a stand with hex holes in it for each T-handle type wrench. I have a set of metric wrenches in a plastic pouch. And I have a drawer in my machinist chest that's full of odds and ends that I like to search through. And I have several sets in solid plastic cases that hang on pegboard. I'm surrounded by allen wrenches. So many wrenches, so little time.

Marv

Re: Major issue of our time *LINK*

#4

Re: Major issue of our time

Bill Houghton, Sebastopol, CA

>Like the other folks so far, I have those fold-out sets (three fractional, one metric), with the old-type L-wrenches in plastic bags when I need them (which is about once every two years).

Where I can, with specific tools, I have dedicated wrenches, but this works only where the tool has a place to put the wrench, or where the tool lives in a box where I can put the wrench.

Re: Major issue of our time *LINK*

#5

Jack Guzman from Maine

Re: Major issue of our time

Jack Guzman from Maine

>A little bit of C and a little bit of D. My sawzall and jigsaw don't need them.I have a drawer full plus every time I see a good used set cheap,I buy them.I've got allen wrenches in the truck, in tool bags,on back of the bench,on shelves--you get the idea.I'm the same way with pencils and tape measures.I figure if you have one evertwhere,you can't lose them all.---Jack

Re: Major issue of our time *LINK*

#6

throw them all out........

Bill Tindall, E.TN

>and buy one metric and one English set that live some reliable place. Sets come with some sort of holder and it keeps them all in one tidy place available for any task as needed.

For machines, like allen for blade guide on band saw, I put a disk magnet on the machine and fasten the key to the magnet.

Re: Major issue of our time *LINK*

#7

Re: Major issue of our time

Marc Waldbillig

>Wiley,

Last time your tools came to my mind, I thought of your japanese saws, no way to think of allen keys...

Now I'm wondering what you bear in mind - allen key included.

Marc

p.s. Shortly I read a book on Feng shui - Clear your Cutter with Feng Shui. What do I have to admit? Spent the day in the store room, drove to the recycling center twice.

p.p.s. I have one set on my pegboard and one as hex bits near the workbench - all the other sets I do not bother...

Re: Major issue of our time *LINK*

#8

Re: Major issue of our time

Ron in Sterling, CT

>I have a metric set and a fractional set in my basement woodshop, and the same combination in the garage. I always know where they are and never have to go searching. I also have a small box of accumulated wrenches in the basement, and when the other options fail I go to my last resort, but that doesn't happen very ofter.

Re: Major issue of our time *LINK*

#9

Re: Major issue of our time

steve mackay

>Long ago, in the dark ages, when I got Pershing II missile, half the darn thing was put together with inset hex heads. I always like to carry most used tools in my web gear as we figured we weren't going to last long enough to need any stink'n ammo. One time I asked Dad how he might carry all these Allens (Dad is a pretty smart guy). He told me Craftsman had the pocket-knife like thingie. Bought one and had it ever since. All the wrnches that come with furniture and machines go somewhere. I think THAT box. No wait, THAT box. Hmmmmmmm.

Re: Major issue of our time *LINK*

#10

Re: Major issue of our time

John in NM

>To some extent I do all those things, though since individual allen wrenches are cheap, I tend to buy singles in the sizes I need and keep them with the tool. At work we have huge numbers of sets in every possible location, plus lots of spare sets missing a few (the most used sizes of course). Now if you really want to avoid the problem, replace the allen set screws with slotted ones and keep a bunch of screwdrivers around. I recently came across a new one for me - a 2-56 bristol head screw - Ye-ikes! I may replace them with allens :)

Re: Major issue of our time *LINK*

#11

Re: Major issue of our time

Bruce, a MN Galoot

>On a couple of my machines -- DP and BS and a few other smaller thingies, I got some rare earth magnets from Rob and just stick them to the machine. They're always where I need 'em.

Bruce

Re: Major issue of our time *LINK*

#12

Re: Major issue of our time

VT_Andy

>I have lost so many of them, that if I need to find one at this point, there always seems to be one wherever I look!

Re: Major issue of our time *LINK*

#13

Re: Major issue of our time

Victor Parisian

>Table Saw, skill saw, drill press, band saw, joiner, planer and router each has a place at the tool for the tools required for adjusting. I try to keep them in that place, unless I forget and they somehow end up on my night stand, but I usually put them away as soon as I catch them wandering.

Now the ones at work are another story.... There are certain ones that seem to sprout legs. The 4.5 mm don't last long. I forget right now what it is that 4.5mm fits, but I know it gets used alot. They get rounded from over tightening by Tarzan or someone who thinks he is Tarzan. What was it that Bill said about employees and the company's tools? I digress..

Victor - the lights are out we are out of Halloween candy

Re: Major issue of our time *LINK*

#14

OT - Hallowe'en

Bill Houghton, Sebastopol, CA

>We had maybe 6-8 kids this year - gave up by 7:45. Such a disappointment, and it was a great night for it, too: clear and warm, a Saturday, nothing to make it hard on the parents. I love seeing the little kids and the creative costumes. I don't know what's happened around here, but the traffic on Hallowe'en has fallen off consistently over the last several years.

Re: Major issue of our time *LINK*

#15

Re: OT - Hallowe'en

Wiley Horne--So. Calif.

>Almost as light here, Bill. We're gonna have to eat 5lb of candy again this year. I may leave it out for the crows. Lights out at 9pm.

The highlight as usual are the little ones brought around by their Moms and Dads. The little girl from next door was unbelievably cute with her cat whiskers and black cat smudge on her nose, and a mop of blond hair. She always is offering presents to our little Italian Greyhound, like sticks and ginkgo leaves, with the utmost sincerity.

Wiley

Re: Major issue of our time *LINK*

#16

Re: Major issue of our time

Pam Niedermayer, Austin, TX

>This is a potential problem that calls for "everything in its place and a place for everything," to which I'd add "get good at making labels." And I try to store the wrenches either in a drawer till with lots of other stray wrenches or with the item it's to wrench.

Pam

Re: Major issue of our time *LINK*

#17

Re: Major issue of our time

Bob Demers

>Devilish little key arent they? They are used everywhere, yet are nowhere to be found when you needed them, or so it seem, regardless of how many you have...somewhere.

A. Yeah right, forget about it!!!

B. I have treaten myself to do that on many occasions to no avail :-)

C. You got that right

D. Been known to do that, on many occasions, with dubious success, until the kids come up with the 'one' and ask 'You are looking for that that one dad?' How do they do that ???

E. Nope, used magnets

F. Nope my sawzall is tooless blade change, Gotta love that

G. Got various holders or tool pouches were some dedicated set resides

As a result of all these feeble attempts to have it when you need it, I own a rather large assortments of various incarnation of Hex keys: Foldable pocket knife style, L shaped loose sets, Bondhaus Ball ends with molded plastic handles, love these, Special plastic handle from GC electronics that secure a straight hex keys, come with various built-in collets to secure them (you gess it with a another hex key of course), and color coded sets (metric and Imperial)etc etc

Most of the above come in both metric and Imperial, and with T handles, L handles, or plastic handles like screwdrivers. Also have Bristol sets (British equipment and some old Canadian sets used them)

The tiniest I ever used and keep loosing was from my VCR servicing days (Panasonic authorized service center)0.9 mm used to lock the traveling tape guide post, and of course if was a special L shaped one only avail thru Panasonic....To darn small to keep track

To resume, surround yourself with wall to wall hex keys and chance are the one you need is the one you somehow missplaced, go figure :-)

Bob, overdue to coral a few errand tools

Re: Major issue of our time *LINK*

#18

Re: OT - Hallowe'en

Bob Hackett

>My wife works in a retail shop afew blocks away from LL Bean in Freeport.Every year local merchants advertise trick or treating from 4-6 at their stores.Any guesses who the candy man was for my wife`s store?

It was nice to see all the kids(and parents)out having fun.I have noticed a switch to hand made costumes up here and imagination abounds.

Good to get out as we live at the end of a dead end rural road and only get the grandkids most years

Mainely,Bob

Re: Major issue of our time *LINK*

#19

I avoid the issue...

Stephen Shepherd in the State of Deseret

>by not owning any tools that need allen wrenches, so I don't have any. I had a tool once that had one and I replaced the allen screw with a slotted set screw, I can always find an appropriate screwdriver.

Stephen

Re: Major issue of our time *LINK*

#22

Re: Major issue of our time *LINK*

charlie belden

>I usually make a home for dedicated allen wrenches that go with a specific tool. The specific tool usually has other accessories/prats that need coralling so make them a home and include a place for the allen wrench.

The SuperNova2 scroll chuck uses TWO allen wrenches - one for changing jaws and one to tighten or loosen the jaws when on the chuck. They're in a piece of wood, along with a scratch awl on the wall mounted ply that I keep lathe live and drive centers in - next to the lathe.

On the bandsaw, the ceramic guides use an allen wrench. Glued a little sleeve on the front of the upper wheel cabinet for the allen wrench to sit in when not in use.

For the shaper's top screw, the allen wrench is held to the cabinet of the unit with a magnet mounted on the cabinet side. You can get rubber sticky on one side magnetic strips that you can stick on just about anywhere.

Day-Glo orange tape makes a small allen wrench stand out from the debris on a bench top, in a drawer or - god forbid - in a pile of shavings or sawdust.

I've also got a set of color coded T-handled ball end allen wrenches in both imperial and metric mounted on the wall above the drum sander - in their sheet metal holders - just in case all else fails.

Now about that fine line inlay cutter, Michael Fortune made a great one - out of a cabinet scraper. The How to, along with how to use it is at the attached link. Cuts the sides AND removes the waste AND nibbles the ends square.


DIY fine line inlay tool

Re: Major issue of our time *LINK*

#23

Re: Major issue of our time

James Watriss

>I have loose sets in the mechanical tool box...

I have magnets on machines to hold whatever wrenches came with the machine...

I try to keep the original allen key put away with the tool it arrived with, though I don't have any special boxes. Keeping the thing int he same drawer at least is a good start.

And I have some extras kicking around, too, in case I forget about the magnet, because it's mounted out of sight and out of the way... so I never knock the wrenches off, or it's covered in dust, for various reasons.

Re: Major issue of our time *LINK*

#24

Sharpen them

Alex Yeilding

>and use them as cutters in my "witches tooth" router plane.

I was going to say use a rare-earth magnet to attach to a metal part in an area that would not get knocked off, at least for stationary tools. Then I noticed the forum I was replying in, so I take that back!

Re: Major issue of our time *LINK*

#25

Oh I like that.

roninKokomo

>