Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

buffing wheels

Posts

buffing wheels

#1

buffing wheels

Catharine C. Kennedy

>This may be old news, but I just heard this last night & tried it out. I was watching Tod Herrli explaining making hollow & round planes and spoke of making his own, therefore , custom buffing wheels: gather a stack of cardboard to the desired thickness of the wheel(as in cereal packages and the like)- glue them into a pile,clamp them up and, when dry, bandsaw them into a disk (I did 6"), true it up on the lathe, rounding over the edges as necessary. Add it to you buffing setup, add compound, and there you are! It's a "duh" if I ever saw one!!!!

Oh, and the video was well worth it, as well! ;-)

Re: buffing wheels

#2

You can do it with MDF disks too.

Phil Joines Krum,Tx

>

Re: buffing wheels

#3

Ellis Walentine

Nifty trick

Ellis Walentine

>You could make wheels that complement your favorite router bit profiles and use them to sand moldings, although buffing compound wouldn't be the medium. How would you do that anyhow? Do they sell aluminum oxide powder?

Thinking out loud here.

Ellis

Re: buffing wheels

#4

Re: Nifty trick

Victor Parisian

>How about diamond paste to quote someone else on this board "just a quarter inch worm" this "should last you about a month".

With my tongue firmly planted in my cheek.

Victor - rainy Houston

Re: buffing wheels

#5

Re: Nifty trick

Dan Donaldson

>Check with lapidary supply places and you can get the powder in just about any grit you want. If you would like some, let me know and I can send you some. I have at least half a pound or so of many different grits that I bought and use for various things.

Re: buffing wheels

#6

Re: Nifty trick

Alex Grigoriev

>In my understanding, you don't want to use a water or oil-suspended abrasive on a soft (MDF, cardboard, felt) wheel. The grit will just sink in. Green and yellow compounds have wax or paraffine in them, which holds the particles on the surface.