We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>First of all,Dom,I really like both the design and worksmanship on your vise and will forward the link to my brother who is shopping for plans.Yours beats anything either of us has found.I`m sure he`ll be asking about your marking gauge too.
Marv,I`ve been waiting for you to finally post what I knew you had hidden.Being a metal kind of guy I LOVE that vise!I also am just as impressed by the swivel base with pin lock you`ve incorporated.
While I really like to see the projects the folks here post nothing beats being able to get an inside look at the shops you folks work in.It`s the gadgets,tools and fixtures in the background that invariably catch my attention and get me thinking in new directions.
Thanks to you both(and the rest of you too).You folks make me want to become more tech literate and learn how to post pics and links here.
>We could make an article from this to immortalize it ;-) Also, if you do get some plans done, we could link a set to the article so people could download them.
Anytime I build something for the first time I think of it as a prototype. It usually drives me nutz for awhile because I start thinking of all the changes to make when I build another one. Sometimes, the changes will start bugging me before I finish the prototype. If they bug me enough I'll discontinue the prototype and start over. Hard to get anything completed at times. But there comes a point in time when good enough is good enough.
Here's a picture of the backside of the rotating vise. With a vise this big, with huge castings, the back jaw being straight and the front jaw being curved just a bit, the front jaw has to bend in the middle until the whole width of the jaw is clamping the blade, the clamping lever just has to have a roller bearing or it won't work. Even with the roller bearing, I wish the lever was longer for more leverage. Requires quite an effort to open and close this big sucker.
Not sure you can see in this picture, the jackscrews I made to fine adjust the blade up and down. With saws that are badly filed when I get them, I often times have to do mulitple jointings to get the tooth line straight. Each time I joint I remove the blade to re-Dykem the teeth. The jackscrews allows the blade to be put back in the vise at the exact location without having to fiddle around.
Someday when I get a break from filing saws for other people and when my list of ideas for a vise is long enough, I'll probably build one just for the fun of it. I can see you had a lot of fun with yours. Whatever design I end up with, it will rotate, it will have jackscrews and it will include an adjustable roller bearing. I tend to think outside the box, so to speak, and embellish other people's inventions. No need to reinvent the wheel when the wheel is working so perfectly. However, it's open season on mouse traps. :))
I first saw one of these vises on eBay that belonged to Steve Cooke, a fellow saw filer who sells on eBay. I told him I wanted his but he just ignored me. He must have thought I was kidding. The vise is off a semi-automatic saw filing machine. Maybe they were sold separately, but I'm not sure. For many months after seeing Steve's vise, I kept watch on eBay for one to show up. Finally one day it happened. Low and behold one showed up that was only 90 miles from me. Usually these things will be on the east coast, on the other side of world from me, shipping wise. The thing weighs a ton. I put in a huge bid on it thinking the price would go out of sight. I was amazed to get it for only $114.00 plus some UPS charges. One of few great bargains I've gotten on eBay. It looked hardly used, only a few file marks on the top of the jaws.
When rotating the vise, I have a 5/8" bolt through the center of it, up from the bottom where it overhanges the bench top. I attached a stubby handled ratchet handle for loosening and tightening. I have a Disston 3D vise that I used until I got this big sucker. My whole saw filing world changed after doing the setup with this Acme. When filing a lot of saws, it is so convenient to not have to take the saw out of the vise so often. If I was only concerned about my own saws, I would probably do as Dom is doing or stick with something like Joel is selling or just use a Disston 3D vise.
Lots of options when only filing a few saws for yourself from time to time. You guys who have pattern maker's vises, could merely make a vise that easily and quickly attaches to the pattern maker's vise jaws and use that screw handle for tightening the saw vise jaws. Metal filings would be of some concern, but a magnet would quickly find them. The saw vise jaws could be held inplace with a couple stiff compression springs down inside between the lower part of the jaws to also open the jaws when loosening the pattern maker's jaws when removing the saw blade.
This only adds to the mental image I have of the ACME anvils and such that Wiley Coyote uses to brain himself with while attempting to get the Road Runner...
He could do some serious damage to his carcase with that vise.
>Just last night I was going through the LV Catalog circling things, and saw that cam thing, and was wondering what to use it for. The price is right and it's a useful capability. Just nothing hit me at the time...