Dado plane video clip
Catharine Kennedy
>http://www.youtube.com/watch?v=ODMRFut5_Yk
Knowledge You Can Build On — Est. 1998
Dado plane video clip
Catharine Kennedy
>http://www.youtube.com/watch?v=ODMRFut5_Yk
Re: Dado plane video clip
Bill Houghton, Sebastopol, CA
>Catharine,
Thanks for the reposting. Yours was a more comprehensive discussion than the other clips I saw, with an explanation of the dado plane's parts.
Bill, for whom dado planes remain on the watch list
Re: Dado plane video clip *LINK*
Pam Niedermayer, Austin, TX
>Have to admit, that's a lot faster than my sawing approach. Thanks.
BTW, you can copy your link location into the box below the message box, even give it a title if you'd like, which allows readers to simply click on the link (versus select, copy, open a new window, past the link). Below is what it could look like.
Re: Dado plane video clip
Marv
>Maybe if both sides of the dado was scored first, you wouldn't get such a raggedy edge.
Marv
Re: Dado plane video clip
Wiley Horne--So. Calif.
>She was working fast to get the video done and show that the plane makes for quick work; when the nickers are adjusted you get a clean entry. I like to pull the nickers through the cut initially, to verify the nickers are cutting at the right depth, and make sure the channel is knifed in.
Wiley
Re: Dado plane video clip *LINK*
Pam Niedermayer, Austin, TX
>Thanks to Catherine's great demo and Warren's expert hectoring, I'm now the proud owner of two dado woodies, 1/2" and 3/8". Isn't ebay wonderful? :) Anyhow, it's the first tool purchase for me in a long, long time. I'm actually excited.
"new" woodies
Catharine Kennedy
>Congrats! Tou'll love'em!
Re: Dado plane video clip
wilbur
>Thanks for the video! That was really helpful.
You paid what?
Bob Hackett
>Why I once got a box full of these from an old widda woman and got folding change back from my $5.The sale wasn`t much for tools though,only picked up a truckload of blacksmith tools and a complete cooper`s shop.Cost me more in gas than for the purchases.
All kidding aside,nice looking planes Pam.I`m sure they`ll be a useful addition to your kit.Figure out how you pull them yet?;^)
Mainely,Bob-With apologies to thick skinned Todd H.Who`s used to this by now I`m sure.
Re: You paid what?
Pam Niedermayer, Austin, TX
>Yeah, that's what I said, too, even spent quite a few minutes to see if I could avoid revealing the prices; but figured that here they were, in excellent condition, and my first tool buy in a couple of years so why not splurge. If you look at equivalents in Stanley land, I think I did OK.
Haven't got them yet, but the seller says they shipped today priority, expect to play with them this weekend. As to pulling, I have no problems pulling or pushing most any plane, western or eastern. :)
Pam
Look at it this way...
Bob Hackett
>What would a new C&W have cost,or an early collectable plane from a noted maker?
If the other plane is like the pics of the one on the `bay I`d say they were fine planes and should be able to go to work with little work on your part.That`s always a plus that`s not to be underestimated.
MB
Re: Dado plane video clip
Wiley Horne--So. Calif.
>That's a really nice-looking plane. Beautiful piece of beech--the fleck is blinding on the near side, and there are a lot of growth rings there. The wedge finials are stylish too, and obviously original.
Please let us know how it works when it arrives. Thanks for sharing.
Wiley
Re: Look at it this way...
Pam Niedermayer, Austin, TX
>C&W doesn't list a dado plane, although I'm sure they'd be willing to make one; but then it would be months before it would be ready and it certainly would, rightfully, be much more expensive.
I feel bad that I've let Jim Kingshott down. He said you should never spend more than 7 pounds for a molding plane.
Pam
Re: Dado plane video clip
Pam Niedermayer, Austin, TX
>Yes, it's a beaut, just love all those rays on the heel spreading very slightly from top to bottom and left to right, just like Inomoto-san recommends for strength and endurance.
Pam
It is not a moulding plane...
Paul Dzioba
>it is a joinery plane.
Paul Dzioba
Re: It is not a moulding plane...
Pam Niedermayer, Austin, TX
>I know that, Paul; but Kingshott's number is a guideline for all old woodies purchased. If a molding plane should be, say $12, then a joinery plane should be maybe $24, and so forth. Of course it's a pathological calculation. The reason JK said 7lb was that good molding planes were/are all over the place, piles of them about, don't know if that's true for good joinery planes, suspect it's not.
Pam