Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

A tale of two miter planes

Posts

A tale of two miter planes

#1

A tale of two miter planes

Craig D

>Not really, mostly a show-n-tell.

Two miter planes, one bevel down and one bevel up. Both have a 35� cutting angle. Weight difference between the planes is a bit over half a pound (woodie is heavier at 1.8#). Blade widths are 1 3/4� and 1 1/2�. I don�t know how to compare them since I use them for different things, the metal one mostly as a low angle block plane and the woodie as a shooting plane or with-the-grain smoother/jointer. And I don�t need to compare them, after all, you can�t have too many planes, right?


Here is a somewhat staged image of shooting a 1 1/8" walnut board. Staged in that it took a huge effort to shove the plane through the cut but no chatter and long end grain shavings! Me thinks a little more tuning is in order.


Re: A tale of two miter planes

#2

Quality on your picture is a bit low

Bill Houghton, Sebastopol, CA

>since, I suspect, you forgot to upload it.

I've NEVER done anything like that...ha! When we first got e-mail at my old job, I was famous for referring to attachments I hadn't attached.

Re: A tale of two miter planes

#3

Craig, please repost photos

Wiley Horne--So. Calif.

>The low angle designs will be of great interest.

Wiley

Re: A tale of two miter planes

#4

Repost:: A tale of two miter planes

Craig D

>Not really, mostly a show-n-tell.

Two miter planes, one bevel down and one bevel up. Both have a 35� cutting angle. Weight difference between the planes is a bit over half a pound (woodie is heavier at 1.8#). Blade widths are 1 3/4� and 1 1/2�. I don�t know how to compare them since I use them for different things, the metal one mostly as a low angle block plane and the woodie as a shooting plane or with-the-grain smoother/jointer. And I don�t need to compare them, after all, you can�t have too many planes, right?


Here is a somewhat staged image of shooting a 1 1/8" walnut board. Staged in that it took a huge effort to shove the plane through the cut but no chatter and long end grain shavings! Me thinks a little more tuning is in order.


Re: A tale of two miter planes

#5

Re: Quality on your picture is a bit low

Craig D

>Strange - the BB code must be using my credentials when pulling the photos as they show up for me when viewing the post. Another assumption shot down in flames!

Craig

Re: A tale of two miter planes

#6

Wowzer!

Bill Houghton, Sebastopol, CA

>Those end grain shavings are fantastic! You almost owed me a new keyboard, but I leaned back in time to drool on the floor only, missing the keyboard.

Those screwed-on abutments for the wedge on the woodie are quite clever.

Re: A tale of two miter planes

#7

What type of wood?

Bob Hackett

>

Re: A tale of two miter planes

#8

Re: What type of wood?

Craig D

>Two - purple heart and jatoba (all wood from the same three boards). The darker purple heart has really gnarly, interlocked grain that I can't plane (even at 60�) and the lighter color wood is straight grained and wonderful to plane. It is also quite a bit lighter in weight.

Re: A tale of two miter planes

#9

What's the blade...

paul womack

>...in the woodie?

(Nice shavings BTW)

BugBear

Re: A tale of two miter planes

#10

Re: What's the blade...

Craig D

>The woodie has a Lee Valley #3 replacement blade (3/32", I don't know if it is O-1 or A2). I was originally going to make a blade but I had three #3 blades sitting around. The two Sargents didn't work very well at all, they have "ripples"/cups and chattered. I also wanted to see if a "thin" blade works (Philly and Brese use 1/4" for this type of plane). Yes, I think it does but bed/iron flatness are super critical to avoid chatter. A 1/8" or 3/16" blade would make for a easier build.