Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

IBC Replacement Plane Blades *LINK*

Posts

IBC Replacement Plane Blades *LINK*

#1

IBC Replacement Plane Blades *LINK*

David Cockey

>There's a full page ad in the November issue of Popular Woodworking for replacement plane blades by Industrial Blade Company. They are advertising replacement blades for Stanley, Lie-Nielse, and Veritas planes and spokeshaves. The blades are available exclusively through Woodcraft under Woodcraft's "Pinnacle" brand. http://www.woodcraft.com/Category/1002334/Plane-Blades.aspx All are listed as A2 steel.

IBC has a website and are in Toronto. I found this on the website "In 1999, we manufactured some sample blades for a new product line being developed by a leading wood tool reseller. By 2007 we were manufacturing high volumes of over 100 different wood tool blades for them." Not a lot of alternatives for who that customer(s) might be.

One thing I found surprising is that they offer blades for Lie-Nielsen and Veritas in addition to traditonal Stanley, etc planes. The Stanley replacement market has been around a while. It's not clear to me why someone would want an IBC/Pinnacle blade to replace a Lie-Nielsen blade. Same for Veritas other than the IBC/Pinnacle blades are cryogenically treated and I don't believe Veritas blades are. Prices for the IBC blades are about the same as Lie-Nielsen and Veritas blades. Do some folks prefer to buy from Woodcraft rather than Lie-Nielsen or Lee Valley? How big is the market for replacement blades for LN and Veritas planes?

Interesting.....


IBC Website

Re: IBC Replacement Plane Blades *LINK*

#2

Re: IBC Replacement Plane Blades

Neal in San Jose

>I'm guessing here, but perhaps they can set up and make a bunch of LN or LV blades pretty easily since the material, heat treat, etc. would be exactly the same as for the Stanley blades they already run. Even if they only sold a few, their incremental cost would be almost nil. If one (or more) of their established customers requested LN and/or LV replacements, their incremental cost would be zero.