Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Ruler backing . . .

Posts

Ruler backing . . .

#1

Ruler backing . . .

steve mackay

>On my handy-dandy 15", thiner, steel rule, the cork backing has about had it. On this ruler I like the traction of the backing. Question . . . anyone ever tried leather on them ? Wondering if it might last longer than cork but also if it would do evil things I haven't thought of yet.

Re: Ruler backing . . .

#2

Re: Ruler backing . . . *LINK*

Wiley Horne--So. Calif.

>Hi Steve,

You can get cork material in sheets. But then the gluing will be a hassle.

I think I would try 15 micron or 5 micron PSA paper (see link). Cause the adhesive is already on it, it's easy to trim flush after applying (with a marking knife), and the grit is so fine that it isn't 'gritty' feeling and doesn't shed--just has a little tack to it. 15 micron is about like a 1000g water stone; 5 micron is about like a 3000g stone, as far as tack goes.

2 cents.

Wiley


PSA backed fine abrasive sheets

Re: Ruler backing . . .

#3

Jim DeLaney, Austintown, Ohio

Re: Ruler backing . . .

Jim DeLaney, Austintown, Ohio

>FastCap makes a great double-faced tape that's only a couple thousandths thick. It would work nicely for putting the sheet cork onto the ruler.

The tape is really tough stuff - intended for putting veneer edging on plywood. Leave it on overnight, and it's close to forever...

Regards,

Jim D.