Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

tool till

Posts

tool till

#1

tool till

Catharine Kennedy

>This is one of 6 tool tills I made for demonstration at Hancock Shaker Village Museum this season. All pine, about 36" long, vinegar grained finish.


img

Re: tool till

#2

Re: tool till

Catharine Kennedy

>This is the same box, closed.


img

Re: tool till

#3

Nice!

Tony - Memphis

>I like the design. I need to build one. I love Hancock Village. Visited there several years ago. Still have my birdseye maple box on display at home. Can't wait to go back someday.

Tony

Re: tool till

#4

Re: tool till

Stephen Shepherd in the State of Deseret

>Catharine,

Could you explain the 'vinegar graining' finishing process you used?

Stephen

Re: tool till

#5

Re: tool till

wilbur

>That is really nice work! I'd also like to hear more details on your finishing process.

Re: tool till

#6

Nice work!

John in NM

>Is it grain painted?

Re: tool till

#7

Lord, I LOVE drawers ! Wonderfull.

steve mackay

>

Re: tool till

#8

Re: tool till

Catharine Kennedy

>Vinegar graining is an awesome technique I just learned about this summer- the liquid is vinegar, water, and suger (Google vinegar graining for the exact quantities of each) with pigments added for whatever color you need. This is applied over a base coat (the background color for your grain) and manipulated with brushes, plastic bags or what have you. This is totally NON-TOXIC, and can be wiped off if you don't like it! It dries very quickly, so there is not much open time (maybe 10 minutes...) and dries dead flat in color, but when you apply a finish coat of poly or varnish, it absolutely POPS! Great stuff!

Re: tool till

#9

Ellis Walentine

It's quite an art form

Ellis Walentine

>I saw a booth full of pieces painted with this technique in the Philadelphia Furniture Show several years ago. I was blown away by how vivid the colors and patterns were. A lot of that, I suppose, has to do with the skill and artistic vision of the artist.

If I can dig out some photos, I'll post them...

Ellis

Re: tool till

#10

So handsome!

Wiley Horne--So. Calif.

>Catharine,

That is just wonderful work. The drawer staggering and gradation from bottom to top is magnificent. That ledge overhanging the drawer section adds a lot too.

The carcase and framing looks for all the world like tiger maple with maybe a hot iron applied to the curls.

Something I can never get my head wrapped around is the logic and order of installing the case internals. Those drawer blades look liked they're dovetailed into the front sides of the case. So do you make the whole drawer divider assembly and slide it in from the front, or does the blade (alone) slide in from the front, and the other internals slide in from the rear to match. etc etc many questions.

Thanks for showing,

Wiley

Re: tool till

#11

Re: So handsome!

Catharine Kennedy

>process fairly much in order:

dovetail the carcase, disassemble, and lay out where the dadoes go on the side (you dovetail first so you know exactly from where you are measuring!!)

I used a Stanley 39 3/8 for all the dados

Assemble the case & fit the horizontal shelves- once these are in place, you can lay out the perpendicular pieces, marked out in their up & down pairs (I had a great deal of trouble with this step actually coming out perpendicular, which is why I would up making 6 of these boxes!)

The drawer divider grain runs vertically, and these are just slid in- making sure that shelfs are not being pushed out of level by pieces that are too high)

Cut & fit drawer stock with either nails or dovetails- dealer's choice-

Fun stuff- and takes me about 20 hours per tool till...

Re: tool till

#13

Jim DeLaney, Austintown, Ohio

Re: tool till

Jim DeLaney, Austintown, Ohio

>Looks great, Catharine!

I had an enjoyable time visiting your shop and talking with you at the village, back in July. At that time, you had one finished, and one WIP on display.

For all us hand tool junkies, you might post some pictures of that lovely cherry plane you showed me, too.

Regards,

Jim D.

Re: tool till

#14

Hi Catharine...

Scott Burr in Ben Lomond CA

>1st off, Very nice chest! No pun intended, we don't need a red card moment here. I'm curious as what goes in it. Do you have a list?

Excellent job those vertical supports are a challenge aren't they.

Love the finish, thanks for sharing!

Re: tool till

#15

vinegar grained finish- what is this

Bill Tindall, E.TN

>Please tell us more about this finish.

BTW, that is one handsome box.

Re: tool till

#16

Catharine, is this your design or . . .

Tom Colligan

>could you refer us to someone's book having it or a plan somewhere else? Thanks for posting; it's very fine craftsmanship. Tom

Re: tool till

#17

Beautiful box

Dan Donaldson

>Could you post some more closeup pictures showing grain/finish detail and some details of the drawers? Maybe a top view and any others that you think show off the piece. (it deserves to be shown ;-)) If there is any problem getting the pictures small enough to post but big enough to see, send them to me and I will process them for you.

Re: tool till

#18

Look here *LINK*

Dan Donaldson

>The attached link is to a google search for vinegar painted images.


Vinegar painted images

Re: tool till

#19

Wow is an inadequate word

Bill Houghton, Sebastopol, CA

>and to think I feel like I've achieved something when I score a rusty, used mechanic's rollaway at a garage sale to store stuff...

Re: tool till

#20

Masterful (Mistressful?)

Pam Niedermayer, Austin, TX

>The vinegar painting finish is a great looking variation on that design.

Pam

Re: tool till

#21

faux finish

Catharine Kennedy

>The drawers are raw sienna and the case side is burnt sienna


img

Re: tool till

#23

faux finishes

Catharine C. Kennedy

>The really neat part of this is how incredibly simple it is to get fabulous results on the first try! And it's NON-TOXIC!!!!