Gramercy saw vise redux
wilbur
>This weekend at WIA I had the pleasure of getting saw sharpening lessons from Mike Wenzloff's hands on class, and was able to see and try out the new Gramercy saw vise in person.
I learned a lot about saw sharpening this weekend, among a host of other things. But in regards to the saw vise the Joel has developed, here are some things I found out:
1. The Gramercy saw vise works really well in terms of holding the saw so that it is stable and vibration free in use, and is quite easy to use.
2. Comments about stamped steel/sheet metal vs. cast iron aside, this thing is built like a tank.
3. I can see where the sloped profile of the jaws will be of great use.
4. It works great for holding Japanese saws (my own selfish interest :@) ). Here's an action shot:
I also had the opportunity to look at and use a number of vintage cast iron saw vises, including Disstons, and including a Disston D3, during the hands on saw sharpening sessions at WIA. All of these vintage saw vises seemed to be in good condition, and were meant for use. The Gramercy saw vise was clearly superior to all of the vintage saw vises, especially in terms of having a lot less vibration (none, actually), and in how securely the saw was held.



