We value your privacy.
We use cookies to enhance your browsing experience, analyse site traffic, and personalise content.
By clicking “Accept all”, you consent to our use of cookies. You can also choose
“Essential only” or learn more.
>I found one of these in a basement yesterday while I was installing a water heater. The jappaning was 98% or better and over all it was in typical grungy but unrusted condition. I asked the young man who lived there to take it upstairs before it DID start to rust.
I was thinking around forty to fifty bucks value, but a quick check on Ebay is causing me some doubts. What is average going price on these nowadays?
>The #5C is an excellent user plane. Any woodworker would be happy to own one, assuming it is in good shape. Problem is, it is probably the most common plane ever made and can be found in garage sales all across America, Canada and probably several other countries as well. It's not hard to get one and only eccentric headcases like us would even want one. So there is a basic supply and demand problem here. The supply is big and the demand is small.
>I realize that #5s are second only to #4s in terms of availability but I was under the impression that type 11s were just a little more desireable than later models.
This plane would clean up to near new condition. There is zero rust and the sole is clean.
>Around here,an area rich in used hand tools,you could get $40-$50 for that plane if cleaned up carefully(just remove the dirt).As long as everything is right with it.Most #5s I've seen are in fairly rough shape.Badly in need of repairs.Rust spots ,cracked totes,missing parts,worn or poorly ground irons etc.If your plane needs any repair I'd call $40-$50 too high.They really are very common.---Jack