Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Coccobolo and Brass Marking Gauges

Posts

Coccobolo and Brass Marking Gauges

#1

Coccobolo and Brass Marking Gauges

Dominic in Buck's County PA

>Hi gang,

Over the past few weeks I've been discussing marking gauge design with Jack/Timberwolf and Hank Knight (both from WoodNet). After some initial design attempts, I decided that I liked Jack's design the best.

With some help from him I drew up the design in 3D and made a rendering.

cutting gauge prototype

I ended up modifying the design slightly to take advantage of the material I had on hand. But the basic design stayed pretty much the same as Jack's.

The body is coccobolo that was in my scrap bin and was slated to be turned into some marking knife handles. I was able to get enough for (3) marking gauge bodies. The brass came from the scrap bin at work (Yet another advantage to working in a production facility!). The "blade" is 1/8" dia HSS rod that I ground to a point.

Coccobolo and Brass Marking Gauges

Coccobolo and Brass Marking Gauges

Coccobolo and Brass Marking Gauges

After the shape was cut out using (2) forstner bits and a slick little positioning jig, I epoxied the 1/8" thick brass to the front and back. Previous to this, the brass had the holes drilled for the attachment screw. After the epoxy cured, I drilled the holes in the wood for the brass screws, installed them just shy of the surface and then peened them over. After that I filed and sanded the faces flat. The next day I used the Bridgport Milling Machine at work to mill out the 3/16" deep dado in the fence for the beam.

The beam was made from 0.950" wide x 3 1/2" long x 3/8" thick brass. I used the Bridgport and a 5/16" end mill to cut the slot in the beam. To form the 7 deg angled sides of the dovetail "template" I used my specially designed jig at my disc sander. The holes were drilled for the blade and the 10-32 allen set screw that holds it in place.

The 1/4"-20 knurled brass knobs were purchased from Woodpeckers. But the first one (and best looking) came from Jack.

After the construction was completed, the brass was sanded and polished, the body got a coat of sealer, then several coats of shellac. I followed up with some buffing and a coat of wax.

All in all I'm somewhat satisfied with the way they turned out. However, I learned a lot about "infill" construction during this project and would do things quite differently the next time I undertake such a task.

1.) I'd drill the holes in the brass at slightly undersized for the tapered shaft of the screw. This way I could peen them over and not end up with the phillips head showing.

2.) I'd make the beam 4" or maybe 4 1/2" long and probably not bother with the dovetail template. I have a couple nice LV Dovetail templates that work just fine. And the added length of the beam would make the gauge more useful.

3.) I need another type of finish. I'm not sure if shellac is the right way to go. It was a pain to keep it off of the brass. Maybe french polish? I'm not sure.

I'll be bringing these to WIA with me tomorrow. I'd like to get some first hand feedback from those of you I meet up with.

See ya around,

Dominic

Re: Coccobolo and Brass Marking Gauges

#2

WOW! Want to sell one?

Wiley Horne--So. Calif.

>Those have great potential Dominic. I really like the heft on them, especially for cutting (with that alternate cutting blade you'll probably grind some day).

They do have enough mass and face length to take a longer arm, as you were saying.

Great design--congratulations to all involved!

Wiley

Re: Coccobolo and Brass Marking Gauges

#3

Re: Coccobolo and Brass Marking Gauges

George@Colonel's Workshop-Havertown PA

>Good Evening Dominic,

Geeze! Those things are beautiful. The brass sets off the cocobolo perfectly, and the overall workmanship is flawless. No double talk, Dom: your guage is a guage by which all other guages should be guaged. I'll look for them in the next LV catalog.

George

Re: Coccobolo and Brass Marking Gauges

#4

Re: Coccobolo and Brass Marking Gauges

James Watriss

>Suggest in the future that if they're all for your use (which is conceivable) you find a way to mark them, to differentiate. Some projects require multiple gauges at multiple settings, and it's nice to be able to tell which is which if two of them are at similar settings. Even just a number stamped in the brass...

Other than that, beautiful job!

Re: Coccobolo and Brass Marking Gauges

#5

Excellent Smithers...

Scott Burr in Ben Lomond CA

>Er, Dom...

Those look great! I really like the heft of them.

Nother item to put on my to do list.

Re: Coccobolo and Brass Marking Gauges

#6

very spiffy

roninkokomo

>

Re: Coccobolo and Brass Marking Gauges

#7

Dayummmm...those are spanky!

Alan DuBoff

>Those are really nice, great job, I really like them and bet they register really well!

Re: Coccobolo and Brass Marking Gauges

#8

Re: Coccobolo and Brass Marking Gauges

Jim Shaver

>Oh Wow Dom,

very nice, VERY NICE!!!

Take care,

Jim

Re: Coccobolo and Brass Marking Gauges

#9

Enter these in FWW, Dom!

Tom Colligan

>

Re: Coccobolo and Brass Marking Gauges

#10

Re: Coccobolo and Brass Marking Gauges

Dominic in Buck's County PA

>Thanks for the kind words everyone! I've been getting a lot of feedback online as well as some I got from people seeing them at WIA. I've gathered up the comments and will be making some slight changes to the design.

So stayed tune for my next couple! :>)

Re: Coccobolo and Brass Marking Gauges

#11

Re: WOW! Want to sell one?

Dominic in Buck's County PA

>Wiley,

Thanks for the compliments!

The (3) I made are really first efforts. Proof of concept prototypes, if you will. One is for my buddy Mike, one is for me, and the last is being saved for a Secret Santa I participate in.

But when I make the next couple, (with the improvements) then we'll talk! :>)

See ya around,

Dominic

Re: Coccobolo and Brass Marking Gauges

#12

Re: WOW! Want to sell one?

Wiley Horne--So. Calif.

>I'm serious. Please do plan at least one extra. If you'll include one of those HSS pins, I can grind the cutter.

Wiley

Re: Coccobolo and Brass Marking Gauges

#14

Re: Coccobolo and Brass Marking Gauges

Victor Parisian

>Nice work. please keep us posted. I lust for one...

Victor - Houston