Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Tool cabinet Dehumidifier installed!

Posts

Tool cabinet Dehumidifier installed!

#1

Tool cabinet Dehumidifier installed!

Dominic in Buck's County PA

>Hi gang,

I finally installed the Goldenrod Dehumidifier in my tool cabinet today.

To recap: I was having re-occurring problems with rust forming on my hand planes. I had installed some of those anti corrosion emitters that LV sells. But IMHO they work much better in drawers and small spaces. Don't get me wrong, they work! I had a couple in my tool cabinet drawers and never saw an speck of rust. I think that the humidity in the plane tiill area was just too much for them.

A friend of mine who is into competition shooting suggested I look at Goldenrod Dehumidifiers. So I did and ended up purchasing the 1D12 model that is rated to protect 100 cu ft. Since my cabinet it just about 20 cu ft, I feel that this is more than ample.

In order to work properly, these dehumidifiers need to be installed horizontally, and at the base of the cabinet. Since my cabinet has a divider that cuts the inside in two, I decided to drill a 1 1/2" dia hole and have the dehumidifier span both cavities. I also drilled a corresponding hole at the top of the divider to help with the airflow. In addition to the holes, I cut the plane till door down by 1/2" so that it would have an additional 1/4" reveal at the top and bottom to aid the air flow.

In order to make room for the dehumidifier, I moved (4) of the planes in my plane till up along the wall. That really was the hardest part of the installation.

Oh and fishing the electrical cord down the back of the cabinet was a real PITA until I realized I could use one of those articulated magnetic probes to help me fish a cord through. BTW, this model features a plug that can be removed from the wire. That feature made this installation much easier. After that, it was a piece of cake.

The dehumidifier is to the lower right.

Photobucket

Here is a view from the other side of the divider.

Tool Cabinet with dehumidifier installed

And this shows the gap at the top and bottom of the plane till door.

Tool Cabinet with dehumidifier installed

That's about it. So now I'm hoping that I can open my tool cabinet and not get any "rust based" surprises! :>)

See ya around,

Dominic

Re: Tool cabinet Dehumidifier installed!

#2

On what principle do these work? thanks

Chicago Bob

>

Re: Tool cabinet Dehumidifier installed!

#3

Re: On what principle do these work? thanks

Scott in Montana

>They're a small heater that uses natural convection to circulate warm air. If I remember correctly, their surface can get up to 150 degrees. The sales pitch is that they are much safer than installing a lightbulb for heat.

Seems to me that they would prevent rust caused by condensation but not that caused by high humidity. Maybe it can raise the barametric pressure inside the cabinet creating a drier climate? :O)

Scott in Montana

Re: Tool cabinet Dehumidifier installed!

#4

Re: Tool cabinet Dehumidifier installed!

Pam Niedermayer, Austin, TX

>Nice, but why? In my experience the fact of an enclosed wooden cabinet eliminates humidity worries for the tools inside.

Pam

Re: Tool cabinet Dehumidifier installed!

#5

Maybe not so much in Pennsy

Bill Houghton, Sebastopol, CA

>I never lived in Bucks County, but in my brief stay in Philadelphia with my sweetie years ago, there were days that you could cut the humidity in blocks and squeeze a pint of water out of each block.

Bill, happy to live with wet winters...

Re: Tool cabinet Dehumidifier installed!

#6

Re: Tool cabinet Dehumidifier installed!

chuckbeck in cent il

>I install a version of this regularly in pianos. Our system (Dampp-Chaser) performs humidification in the dry winters as well. The heater rods and humidifier bucket are hooked up to a control box that tries to keep the piano around 42% rh. The heater rods work because as you raise temperature with dry heat, the air becomes less saturated. Lots of old pianos have them in them, and our local piano rebuilder near U of I pretty much gives them away (its sweet). The piano rods are 24"-48" wide and 25-50watts each. I've thought about doing the same thing, but I haven't had problems with rust in my cabinet yet. It's funny how a tool cabinet is never full and never finished.

chuckbeck


img

Re: Tool cabinet Dehumidifier installed!

#7

Re: Maybe not so much in Pennsy

Pam Niedermayer, Austin, TX

>Yeah, I lived on the east coast for my first 52 years, and I don't miss the humidity; but the reason I tried the wooden box enclosure method was due to Todd Hughes' advice, and he lives on the eastern shore of Maryland.

Pam

Re: Tool cabinet Dehumidifier installed!

#8

Re: Tool cabinet Dehumidifier installed!

Gary Roberts

>There is also the matter of temperature variation. As the air cools, vapor is released. As it warms, air holds more vapor. When you regulate the ambient temperature, there should be less vapor deposits on the metal. The dry heat also evaporates a certain amount of vapor. These are used frequently in boat lockers too for that very reason. I use one in a closet that is exposed on two sides to the exterior walls. And it works quite well.

Gary

Re: Tool cabinet Dehumidifier installed!

#9

Jesper, Denmark

Re: Tool cabinet Dehumidifier installed!

Jesper, Denmark

>There is a big diffeence in RH levels in PA and Austin, TX. You can be safe with RH =<50%, and get there two ways, remove the moisture, like with a dehumidifier or lower the RH by heating the air. Either works, but the <50% RH is the key.

Re: Tool cabinet Dehumidifier installed!

#10

Re: Tool cabinet Dehumidifier installed!

Pam Niedermayer, Austin, TX

>Actually, not so much difference as you imagine, Austin is quite humid at times, probably 1/4 - 1/3 of the year. Also, this was suggested by Todd Hughes, who lives on the ultra humid eastern shore.

Pam

Re: Tool cabinet Dehumidifier installed!

#11

Question

Bill Tindall, E.TN

>The humidity inside a box, or whatever, is going to be identical to the air outside unless there is something inside the box to lower it, like heat. If it is over 65 % RH, steel rusts. How do you propose that the box will affect rusting, or not?

I just dehumidify the shop to less than 65% and nothing ever rusts.

Re: Tool cabinet Dehumidifier installed!

#12

Re: Question

Pam Niedermayer, Austin, TX

>My theory is that the wood moderates the passage of moisture, stores it so to speak so that it never reaches the tools.

Pam

Re: Tool cabinet Dehumidifier installed!

#13

Dominic in Bucks County PA

What if it's finished wood?

Dominic in Bucks County PA

>Like the shelves in my cabinet or the back of the cabinet where the base of my large plane rest against? Because that's where the rust was happening.

I believe someone else here had addressed the wild temp swings we get here in PA. I found that if we had a super hot summer day and a cool night, the cast iron would collect condensation. Rust would occur in areas that the steel met the wood and there wasn't sufficient air flow to dry the iron.

I had enough of this and decided to install one of these dehumidifiers.

Re: Tool cabinet Dehumidifier installed!

#14

Re: Question

Warren in Lancaster, PA

>My father has used the same tool chest for 79 years. He has lived in the Philadelphia area for 67 of those years and for 50 years the chest was in a wet basement. He has always been very meticulous about keeping the chest shut and I was often reprimanded for leaving it open. The tools in cardboard boxes below the bench rusted; the tools in the chest did not.

Re: Tool cabinet Dehumidifier installed!

#15

Air passage while closed is not a factor

Bill Tindall, E.TN

>Step 1 Open cabinet to get tool. Air outside almost instantly exchanges with air inside so that the air inside is now the same humidity as the air outside. A water molecule will travel(diffuse) about an inch in a second. This transport, plus the convection resulting from opening a door, will be adequate to ensure the humidity equilibrates between outside and inside during a typical tool removal.

Step 2 Shut door. Tools now set in same air conditions as outside air. Tool box has no role in corrosion.

The only thing the cabinet does is moderate the rate of change of outside to inside. I have seen the figures for how quick air in a house exchanges with outside air and it is hours not days. Of course now that I need to remember this figure I can't.

Bottom line I don't see that being in a cabinet has any affect on whether tools will rust or not, unless there is something in the cabinet to remove moisture, lower humidity or deliver a corrosion protecting film, in which case the tool box could assist in retarding corrosion.

Re: Tool cabinet Dehumidifier installed!

#16

Re: Tool cabinet Dehumidifier installed!------WebK

Dominic Greco in Bucks County Pa------WebKitFormBo

>Thanks Jesper! You pretty much covered it.

------WebKitFormBoundarymmPh2M9Ci+AmbhEY

Re: Tool cabinet Dehumidifier installed!

#17

You finished it???!!! Way too obsessive. :)

Pam Niedermayer, Austin, TX

>

Re: Tool cabinet Dehumidifier installed!

#18

Re: Air passage while closed is not a factor

Pam Niedermayer, Austin, TX

>I don't know what more to say. My tools enclosed in wood cabinets/boxes haven't rusted. Many of those outside have. No humidifiers in sight.

Pam